Package Diagram, Pin Tqfp 14 x 20 x 1.4 mm

CY7C1364C

Package Diagram

100-Pin TQFP (14 x 20 x 1.4 mm) (51-85050)

22.00±0.20

R 0.08 MIN. 0.20 MAX.

0.25

	16.00±0.20
	14.00±0.10
100	81
1	80

0.30±0.08

20.00±0.10

0.65

TYP.

30			51

31			50

0° MIN.

STAND-OFF 0.05 MIN. 0.15 MAX.

12° ±1° (8X)

SEATING PLANE

NOTE:

1.40±0.05

SEE DETAIL

0.20 MAX.

1.60 MAX.

0.10

GAUGE PLANE

0° -7°

0.60±0.15

R 0.08 MIN. 0.20 MAX.

1.JEDEC STD REF MS-026

2.BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH MOLD PROTRUSION/END FLASH SHALL NOT EXCEED 0.0098 in (0.25 mm) PER SIDE BODY LENGTH DIMENSIONS ARE MAX PLASTIC BODY SIZE INCLUDING MOLD MISMATCH

3.DIMENSIONS IN MILLIMETERS

1.00 REF.

0.20 MIN.	51-85050-*B

DETAIL A

i486 is a trademark, and Intel and Pentium are registered trademarks, of Intel Corporation. PowerPC is a registered trademark of IBM Corporation. All product and company names mentioned in this document may be trademarks of their respective holders.

Document #: 38-05689 Rev. *E

Page 17 of 18

© Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.

[+] Feedback