Mark Levinson N 320S owner manual Quick Start Guide, Continuous Operation

Page 14

Getting Started

Mark Levinson

1-8

Continuous Operation

Warm-Up & Break-In Period (continued)

After this initial period, performance will remain consistent unless power is disconnected from the ~ac mains connector. Power is disconnected from the ~ac mains connector when the Nº 320S is powered off with the front panel power button; the power cord is disconnected from the ~ac mains connector or the electrical outlet; or an extended power failure or power outage occurs. Power is not disconnected from the ~ac mains connector when the Nº 320S is in standby.

When power returns, the Nº 320S will require a brief warm-up and break-in period (not the full 300 hours). It is recommended to allow the Nº 320S and other audio components to stabilize for about 2 minutes.

Note

•When powered on with the front panel power button, the Nº 320S automatically enters standby after completing the initialization sequence.

•The main output connectors are muted while the Nº 320S performs the initialization sequence.

The Nº 320S should be unplugged during lightning storms and extended periods of non-use. Otherwise, it is designed for continuous operation. For best performance, make sure power is connected to the ~ac mains connector at all times. During normal operation, do not use the power button to power off the Nº 320S. Instead, use the front panel or remote control standby button to place the Nº 320S into standby, which allows the Nº 320S to remain warmed-up to deliver optimal performance at all times.

Quick Start Guide

These instructions are intended to accommodate immediate use of the Nº 320S. However, it is important to read this owner’s manual before attempting more extensive use. This owner’s manual contains information about features that enhance operation and performance, as well as important safety, installation, and operation instructions designed to prevent personal injuries as well as product damage.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Nº 320S Preamplifier Important Safety Instructions This triangle, which appears on your componentCustomer Support Table of Contents Appendix Troubleshooting & MaintenanceControls & Modes IndexDocumentation Conventions Special Design Features Getting StartedGetting Started Mark Levinson Highlights Nº 320SProduct Registration Unpacking Installation ConsiderationsIr input connector RS-232 port Balance controlPlacement QuantityRemote Control Batteries To replace the remote control batteriesPower Requirements Warm-Up & Break-In PeriodQuick Start Guide Continuous OperationTo begin using the Nº 320S Never Make or Break Connections to the Nº 320SQuick Start Guide Front Panel Overview Power buttonBasic Operation Front panel display Standby button & LEDSelect knob Polarity LEDEnter button Volume knobSetup button & LED Mute button & LED Display intensity buttonBalance button & LED ~ac mains connector Rear Panel OverviewBasic Operation Stereo input connectorsStereo main output connectors Stereo record output connectors Slave in communication portsIr input connector Phono ground connectorTrigger output connector Serial number labelNº 320S is compatible with LinkingMaking Link Connections Making Link Connections Components. The Link communication port names used All slave chainsLink communication port names differ among Mark Levinson Table below correspond with the component listedTo create a slave chain that includes the Nº 320S Link Controls Nº390S Nº360SStandby DisplayIntensity PlaybackRemote Control Overview Operation ConsiderationsSetup button Command OverviewStandby Setupenter IR transmitterVolume ± buttons Select ± buttonsDisplay button Polarity buttonBalance button Mono buttonNº 320S Setup Menu Navigating the Setup MenuTo open the setup menu Setup buttonSetup Menu Enter buttonFactory-Default, Custom Select knob ± buttons Volume knobDefault Possible Parameter Setting Settings Name Set Inputs MenuCustom Names List Set Inputs Menu ShortcutName To shortcut to the Set Inputs menu for the selected inputRtoR UnusedActivates SSP surround sound processor mode, which No30, No30.5Character List To customize the name of the selected inputOffset Nº 320S Setup MenuGain Gain parameter should be set before the Offset parameterTeach IR Menu Rec.OutCommand Description To teach Nº 320S IR commands to a learning remote control MaxVol Setup Menu ParametersMute TrigControls & Modes StandbyDisplay Intensity To set the sleep timerWhen the OFF 0% illumination level is selected Controls & ModesPolarity To adjust display intensityTo adjust main output signal polarity BalanceControls & Modes Mark Levinson To toggle between mono and stereo playback To select the desired mono modeMono Playback + R Balance Control Tip To use the L + R balance controlPhono Alignment Tip To use L R mono playback to align phono cartridge azimuthSSP Surround Sound Processor Mode To activate and use SSP mode Saving Data No Power No Remote Control Operation 5Troubleshooting & MaintenanceTroubleshooting Troubleshooting & Maintenance No IR Learning No Main Output No Record Output Audible HumNº 320S Restoring Factory-Default Settings To restore factory-default settingsDo not Apply Liquid Directly to the Nº 320S Care & MaintenanceNº 320S Troubleshooting & Maintenance Appendix SpecificationsSpecifications are subject to change without notice Appendix Crosstalk Residual Noise Frequency Response WeightSetting Connectors Input Overload Input Impedance Output ImpedanceTop View DimensionsFront View Installation Worksheet Mute Polarity MaxVol Intensity Trig Balance Mono PlaybackIndex Index Nº320S Power requirements, Nº320S, 1-7 to Obtaining service, IBCPower consumption, Nº320S, A-1 Reel-to-reel players Remote controlTroubleshooting, 5-1 to 5-3TUNER input name, 3-5tuners Warm-up & break-in period, Nº320S, 1-7 toObtaining Service

N 320S specifications

The Mark Levinson N 320S is a standout in the field of high-performance audio, representing an exquisite blend of cutting-edge technology and timeless design. Known for its remarkable fidelity and expansive sound stage, this device appeals to audiophiles who demand nothing but the best from their sound systems.

One of the main features of the N 320S is its dual-mono architecture. This design ensures that both channels have separate power supplies, signal paths, and amplification stages, which minimizes crosstalk and enhances audio purity. The result is a stereo experience that is expansive and richly detailed, allowing listeners to appreciate the subtle nuances in their favorite music tracks.

The N 320S also incorporates advanced digital signal processing capabilities. With a high-resolution DAC (digital-to-analog converter), it supports various file formats, including top-tier high-resolution audio. This versatility means that whether listeners prefer streaming hi-fi music or playing from a local library, the N 320S can handle it all with ease, offering pristine sound quality.

Additionally, the inclusion of a proprietary Harman Logic 7 processing technology allows the N 320S to deliver an immersive surround sound experience from stereo sources. This capability transforms simple two-channel audio into an enveloping sound field, enhancing the listening experience for movies and concerts alike.

The build quality of the Mark Levinson N 320S further exemplifies its commitment to excellence. Constructed with premium materials and meticulous craftsmanship, it not only performs exceptionally but also looks stunning in any audio setup. The front panel features a sleek design with a large, easy-to-read display, and its intuitive controls ensure that users can navigate through settings effortlessly.

In terms of connectivity, the N 320S provides a multitude of input options, including analog and digital connections, as well as Bluetooth capabilities for wireless streaming. This wide range of inputs makes it highly versatile, allowing users to integrate it seamlessly into their existing audio systems.

Overall, the Mark Levinson N 320S is a testament to the brand's dedication to high-fidelity sound and innovative technology. With its impressive features and sophisticated design, it stands as a remarkable choice for those who seek an elite audio experience. Whether for music or cinema, the N 320S delivers in a way few others can, making it a prized addition to any audiophile's collection.
Top Page Image Contents