Mark Levinson N 320S owner manual Nº 320S

Page 59

Nº 320S

“Missing” Input

No Link Controls

Erratic Behavior

If All Else Fails...

Troubleshooting & Maintenance

1.Make sure the Name parameter for the selected input has not been set to unused.

1. Make sure the slave chain includes Mark Levinson components that are compatible with the Nº 320S.

2. Examine Link connections to ensure a solid connection between linked components.

3. Make sure Link connections have been made using Link communication ports and supplied or constructed Link communication cables.

4. Make sure constructed Link communication cables have been twisted 180˚ as shown in the illustration at the bottom of page 2-10 for a straight-through (pin 1-to-pin 1) connection.

5. Examine the slave chain to ensure that connections meet all of the requirements listed in the table on page 2-11.

6. Make sure Link controls have been enabled on the linked digital transport(s) linking menu, which allows activation and deactivation of individual Link controls. Refer to the appropriate digital transport owner’s manual for additional information.

7. Make sure linked components have been powered on in the

5-3

order specified in step 4 (page 2-12). Linked components must be powered on ONE AT A TIME in this order to ensure proper functioning of Link controls.

1.Power cycle the Nº 320S, waiting at least 10 seconds between powering the Nº 320S off and on.

2.Restore factory-default settings.

1.Power cycle the Nº 320S, waiting at least 10 seconds between powering the Nº 320S off and on.

2.Restore factory-default settings.

3.Contact an authorized Mark Levinson dealer.

4.Contact Mark Levinson Customer Support at 781-280-0300 or www.marklevinson.com.

(continued)

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Nº 320S Preamplifier This triangle, which appears on your component Important Safety InstructionsCustomer Support Table of Contents Index Troubleshooting & MaintenanceControls & Modes AppendixDocumentation Conventions Getting Started Special Design FeaturesGetting Started Mark Levinson Nº 320S HighlightsBalance control Installation ConsiderationsIr input connector RS-232 port Product Registration UnpackingQuantity PlacementTo replace the remote control batteries Remote Control BatteriesWarm-Up & Break-In Period Power RequirementsContinuous Operation Quick Start GuideNever Make or Break Connections to the Nº 320S To begin using the Nº 320SQuick Start Guide Front Panel Overview Power buttonBasic Operation Polarity LED Standby button & LEDSelect knob Front panel displayEnter button Volume knobSetup button & LED Mute button & LED Display intensity buttonBalance button & LED Rear Panel Overview ~ac mains connectorBasic Operation Stereo input connectorsStereo main output connectors Slave in communication ports Stereo record output connectorsSerial number label Phono ground connectorTrigger output connector Ir input connectorNº 320S is compatible with LinkingMaking Link Connections Making Link Connections Table below correspond with the component listed All slave chainsLink communication port names differ among Mark Levinson Components. The Link communication port names usedTo create a slave chain that includes the Nº 320S Nº390S Nº360S Link ControlsPlayback DisplayIntensity StandbyOperation Considerations Remote Control OverviewIR transmitter Command OverviewStandby Setupenter Setup buttonSelect ± buttons Volume ± buttonsMono button Polarity buttonBalance button Display buttonNº 320S Navigating the Setup Menu Setup MenuEnter button Setup buttonSetup Menu To open the setup menuSet Inputs Menu Select knob ± buttons Volume knobDefault Possible Parameter Setting Settings Name Factory-Default, CustomTo shortcut to the Set Inputs menu for the selected input Set Inputs Menu ShortcutName Custom Names ListNo30, No30.5 UnusedActivates SSP surround sound processor mode, which RtoRTo customize the name of the selected input Character ListGain parameter should be set before the Offset parameter Nº 320S Setup MenuGain OffsetRec.Out Teach IR MenuCommand Description To teach Nº 320S IR commands to a learning remote control Trig Setup Menu ParametersMute MaxVolStandby Controls & ModesControls & Modes To set the sleep timerWhen the OFF 0% illumination level is selected Display IntensityBalance To adjust display intensityTo adjust main output signal polarity PolarityControls & Modes Mark Levinson To toggle between mono and stereo playback To select the desired mono modeMono Playback To use the L + R balance control + R Balance Control TipTo use L R mono playback to align phono cartridge azimuth Phono Alignment TipSSP Surround Sound Processor Mode To activate and use SSP mode Saving Data No Power No Remote Control Operation 5Troubleshooting & MaintenanceTroubleshooting No IR Learning No Main Output No Record Output Audible Hum Troubleshooting & MaintenanceNº 320S To restore factory-default settings Restoring Factory-Default SettingsDo not Apply Liquid Directly to the Nº 320S Care & MaintenanceNº 320S Troubleshooting & Maintenance Appendix SpecificationsSpecifications are subject to change without notice Input Overload Input Impedance Output Impedance Crosstalk Residual Noise Frequency Response WeightSetting Connectors AppendixTop View DimensionsFront View Mute Polarity MaxVol Intensity Trig Balance Mono Playback Installation WorksheetIndex Index Nº320S Reel-to-reel players Remote control Obtaining service, IBCPower consumption, Nº320S, A-1 Power requirements, Nº320S, 1-7 toWarm-up & break-in period, Nº320S, 1-7 to Troubleshooting, 5-1 to 5-3TUNER input name, 3-5tunersObtaining Service

N 320S specifications

The Mark Levinson N 320S is a standout in the field of high-performance audio, representing an exquisite blend of cutting-edge technology and timeless design. Known for its remarkable fidelity and expansive sound stage, this device appeals to audiophiles who demand nothing but the best from their sound systems.

One of the main features of the N 320S is its dual-mono architecture. This design ensures that both channels have separate power supplies, signal paths, and amplification stages, which minimizes crosstalk and enhances audio purity. The result is a stereo experience that is expansive and richly detailed, allowing listeners to appreciate the subtle nuances in their favorite music tracks.

The N 320S also incorporates advanced digital signal processing capabilities. With a high-resolution DAC (digital-to-analog converter), it supports various file formats, including top-tier high-resolution audio. This versatility means that whether listeners prefer streaming hi-fi music or playing from a local library, the N 320S can handle it all with ease, offering pristine sound quality.

Additionally, the inclusion of a proprietary Harman Logic 7 processing technology allows the N 320S to deliver an immersive surround sound experience from stereo sources. This capability transforms simple two-channel audio into an enveloping sound field, enhancing the listening experience for movies and concerts alike.

The build quality of the Mark Levinson N 320S further exemplifies its commitment to excellence. Constructed with premium materials and meticulous craftsmanship, it not only performs exceptionally but also looks stunning in any audio setup. The front panel features a sleek design with a large, easy-to-read display, and its intuitive controls ensure that users can navigate through settings effortlessly.

In terms of connectivity, the N 320S provides a multitude of input options, including analog and digital connections, as well as Bluetooth capabilities for wireless streaming. This wide range of inputs makes it highly versatile, allowing users to integrate it seamlessly into their existing audio systems.

Overall, the Mark Levinson N 320S is a testament to the brand's dedication to high-fidelity sound and innovative technology. With its impressive features and sophisticated design, it stands as a remarkable choice for those who seek an elite audio experience. Whether for music or cinema, the N 320S delivers in a way few others can, making it a prized addition to any audiophile's collection.
Top Page Image Contents