Mark Levinson 500H owner manual Trigger Input and Output Ethernet Port AC Input

Page 13

Nº500H Series Power Amplifier

Banana plugs can also be used to connect the speaker cables to the loudspeaker binding posts. Banana plugs are not available on the 230 VAC model.

Caution! DO NOT OVERTIGHTEN the binding posts. The innovative design of these binding posts provides more leverage; hence, high-contact, tight pressure connections are achieved when finger-tightened.

DO NOT FORCE the binding post “wings” over a bent or oversized connector. Doing so may damage the binding post.

Trigger Input and Output

Ethernet Port

AC Input

Caution!

The rear panel of the amplifier has two trigger connectors – one input and one output. The trigger input can receive a 3-12VDC signal from a connected component. The trigger output passes through the trigger input signal, enabling a daisy-chain of amplifiers to be controlled by a single trigger signal.

The triggers enable the power amplifier to be automatically powered on or put into Standby mode, by the state of other devices in the system. The trigger output can also affect other power amplifiers in the same manner.

Receiving a trigger signal causes the amplifier to change its power

9

 

state. If the amplifier is powered on, then 0V on the trigger signal

 

puts the amplifier into Standby or mode. Conversely, an amplifier

 

in Standby mode is powered on when 3-12VDC is received on the

 

trigger input.

 

The Ethernet port is a standard 10Base-T connection for use with

 

external control and networking. The Nº500H series supports

 

connection to a router or network, and to a PC-compatible

 

computer.

 

This connection is designed for use with proprietary Mark Levinson

 

external controllers, such as ML Net, or can provide serial port

 

control. For a list of the serial commands available, refer to the

 

separate document, No. 5 series Power Amplifier Serial Protocol

 

Definitions.

 

Provides AC power to the amplifier when the supplied power cord

 

is connected from the AC Input connector on the rear panel to an

 

electrical outlet.

 

Before operating the amplifier, verify that the voltage label near the AC input connector indicates an operating voltage compatible with the voltage level of the electrical outlet you intend to use.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents No500H Series Power Amplifier FCC Notice Iii Important Safety InstructionsDocumentation Conventions Safety Terms & SymbolsMark Levinson Table of Contents Product Description What’s in the Box IntroductionShipping box includes Unpacking Placement and Ventilation Installation ConsiderationsPower Requirements Operating States Standby Button Front PanelStatus LED Rear Panel Power SwitchLoudspeaker Binding Posts Audio Channel InputsSingle-Ended Inputs Balanced InputsTrigger Input and Output Ethernet Port AC Input Standby mode is powered on when 3-12VDC is received onExternal control and networking. The Nº500H series supports Material Requirements Network SetupTo Connect Using a Router Connecting the CablesComputer Requirements To Connect Without a RouterNetwork Setup Parameters On the computer, open the Internet Explorer Web browser Connecting With Dhcp RecommendedNetwork Setup for Windows XP Setting Up ComputerNetwork Setup for Windows Connecting With Static IP AddressingTo change the IP address of the amplifier To change the host name of the amplifierDirect Connection Earlier Setting up the Computer procedure for instructionsML Net Masters and Slaves Connecting DevicesFigure below illustrates a typical ML Net setup Discovering Slaves Status Reporting Fault ReportingNo Power No Output TroubleshootingExamine the electrical circuit breaker to ensure that power Can’t Assign in ML NetEnsure that the local DNS server is properly configured No Response to Commands in ML NetNo Connectivity Via Ethernet If All Else Fails ML Net Fault Conditions Fault ProtectionFault condition no longer exists DamageCare & Maintenance Restoring Factory DefaultsNº531H, 532H, 533H Specifications Nº535H Specifications 2004/108/EC and 2006/95/EC, as amended Declaration of Conformity

500H specifications

The Mark Levinson 500H is a sophisticated audio amplifier that exemplifies the brand's commitment to high-quality sound reproduction and advanced engineering. Renowned for its exceptional performance and aesthetic appeal, the 500H is a powerful addition to any high-fidelity audio system.

One of the standout features of the Mark Levinson 500H is its hybrid design, which combines both solid-state and tube amplification technologies. This hybrid approach allows for the warm, natural sound characteristics typically associated with tube amplifiers, along with the power and control that solid-state technology offers. This results in an amplifier that can handle a wide range of musical genres while delivering an engaging listening experience.

The 500H boasts a robust power output, providing up to 200 watts per channel into 8 ohms, which ensures ample power for driving even the most demanding speakers. Additionally, its advanced Class AB topology allows for efficient power delivery, minimizing distortion and maximizing headroom. The amplifier is also equipped with a unique auto-biasing feature that ensures optimal performance across different listening levels, preserving sonic integrity at all times.

In terms of connectivity, the Mark Levinson 500H offers a comprehensive array of options. It includes balanced XLR and unbalanced RCA inputs, allowing for flexible integration into various audio systems. Furthermore, it features a robust digital-to-analog converter (DAC) that supports high-resolution audio formats, enabling audiophiles to enjoy music in superior quality.

The design of the 500H is nothing short of stunning, with a sleek chassis that reflects the brand's luxury ethos. The front panel includes intuitive controls and a high-resolution display, making it easy for users to navigate through settings and make adjustments.

Attention to detail is evident in the build quality of the 500H, which features high-end components that enhance reliability and longevity. Every aspect of the amplifier has been meticulously designed to ensure optimal performance, from the premium capacitors to the custom transformers.

Overall, the Mark Levinson 500H is more than just an amplifier; it's a statement piece that delivers both aesthetic pleasure and unparalleled audio performance. Whether for critical listening or casual enjoyment, it embodies the pinnacle of audio engineering and is sure to impress even the most discerning audiophiles.
Top Page Image Contents