Mark Levinson 500H owner manual Operating States

Page 9

Nº500H Series Power Amplifier

If this case occurs, consider installing a dedicated AC circuit for the system. Contact a licensed electrician for assistance. If more than one AC circuit is providing power to the system, contact a licensed electrician to ensure that all components are operating with the same solid, low-impedance ground reference.

Caution! Building regulations and electrical codes differ from location to location, making it impossible to anticipate the requirements of amplifier high-current AC circuits, such as the No500H series power amplifier is capable of using. Contact a local, licensed electrician for further information.

Operating States

Caution!

The Nº500H series power amplifier is designed for continuous operation and has three operating states:

•Off – AC power is disconnected using the rear-panel Power switch or by removing the power cord from the rear panel.

•Standby – this is an energy-saving mode. AC power is only connected to the low-voltage power supply, so all nonaudio functions, such as ML Net and triggers, are active.

• On – the amplifier is fully powered and all outputs are active.

5

 

The amplifier should be unplugged during lightning storms and

 

extended periods of nonuse as a precaution against potentially

 

damaging power surges through the line.

 

BEFORE moving the power amplifier, make sure it is powered off with the Power button. Then make sure the power cord is disconnected from the rear panel connector and the electrical outlet.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents No500H Series Power Amplifier FCC Notice Iii Important Safety InstructionsSafety Terms & Symbols Documentation ConventionsMark Levinson Table of Contents Introduction Product Description What’s in the BoxShipping box includes Unpacking Placement and Ventilation Installation ConsiderationsPower Requirements Operating States Front Panel Standby ButtonStatus LED Rear Panel Power SwitchLoudspeaker Binding Posts Audio Channel InputsSingle-Ended Inputs Balanced InputsStandby mode is powered on when 3-12VDC is received on Trigger Input and Output Ethernet Port AC InputExternal control and networking. The Nº500H series supports Material Requirements Network SetupTo Connect Using a Router Connecting the CablesComputer Requirements To Connect Without a RouterNetwork Setup Parameters On the computer, open the Internet Explorer Web browser Connecting With Dhcp RecommendedNetwork Setup for Windows XP Setting Up ComputerNetwork Setup for Windows Connecting With Static IP AddressingTo change the IP address of the amplifier To change the host name of the amplifierDirect Connection Earlier Setting up the Computer procedure for instructionsML Net Masters and Slaves Connecting DevicesFigure below illustrates a typical ML Net setup Discovering Slaves Status Reporting Fault ReportingNo Power No Output TroubleshootingExamine the electrical circuit breaker to ensure that power Can’t Assign in ML NetNo Response to Commands in ML Net Ensure that the local DNS server is properly configuredNo Connectivity Via Ethernet If All Else Fails ML Net Fault Conditions Fault ProtectionFault condition no longer exists DamageCare & Maintenance Restoring Factory DefaultsNº531H, 532H, 533H Specifications Nº535H Specifications 2004/108/EC and 2006/95/EC, as amended Declaration of Conformity

500H specifications

The Mark Levinson 500H is a sophisticated audio amplifier that exemplifies the brand's commitment to high-quality sound reproduction and advanced engineering. Renowned for its exceptional performance and aesthetic appeal, the 500H is a powerful addition to any high-fidelity audio system.

One of the standout features of the Mark Levinson 500H is its hybrid design, which combines both solid-state and tube amplification technologies. This hybrid approach allows for the warm, natural sound characteristics typically associated with tube amplifiers, along with the power and control that solid-state technology offers. This results in an amplifier that can handle a wide range of musical genres while delivering an engaging listening experience.

The 500H boasts a robust power output, providing up to 200 watts per channel into 8 ohms, which ensures ample power for driving even the most demanding speakers. Additionally, its advanced Class AB topology allows for efficient power delivery, minimizing distortion and maximizing headroom. The amplifier is also equipped with a unique auto-biasing feature that ensures optimal performance across different listening levels, preserving sonic integrity at all times.

In terms of connectivity, the Mark Levinson 500H offers a comprehensive array of options. It includes balanced XLR and unbalanced RCA inputs, allowing for flexible integration into various audio systems. Furthermore, it features a robust digital-to-analog converter (DAC) that supports high-resolution audio formats, enabling audiophiles to enjoy music in superior quality.

The design of the 500H is nothing short of stunning, with a sleek chassis that reflects the brand's luxury ethos. The front panel includes intuitive controls and a high-resolution display, making it easy for users to navigate through settings and make adjustments.

Attention to detail is evident in the build quality of the 500H, which features high-end components that enhance reliability and longevity. Every aspect of the amplifier has been meticulously designed to ensure optimal performance, from the premium capacitors to the custom transformers.

Overall, the Mark Levinson 500H is more than just an amplifier; it's a statement piece that delivers both aesthetic pleasure and unparalleled audio performance. Whether for critical listening or casual enjoyment, it embodies the pinnacle of audio engineering and is sure to impress even the most discerning audiophiles.
Top Page Image Contents