Mark Levinson 500H owner manual Nº531H, 532H, 533H Specifications

Page 28

Mark Levinson

Nº531H, 532H, 533H

Specifications

All specifications are subject to change without notice.

Input & Output Connectors • one balanced XLR input per channel

one unbalanced RCA input per channel

one pair “Hurricane” loudspeaker outputs with banana-plugsockets per channel (banana-plug socket not available on the

230 VAC models)

Control Connectors • one Ethernet 10Base-T port

one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc

one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc

3-pin IEC standard power connector

Rated Output Power 20Hz to 20kHz at <0.5% THD, 300W per channel @ 8 Ω, full output from 2.25Vrms

Frequency Response within 0.5dB from 10Hz to 20kHz

24Signal-to-Noise Ratio >85dB, reference level: 2.83 Vrms

Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced)

Voltage Gain

26.8dB

Input Sensitivity

2.83Vrms output at 130mVrms input

Power Requirements

100V~, 120V~, 230V~, factory set for destination country

 

Nº531H: 300W; Nº532H: 600W; Nº533H: 900W

Dimensions* • Height (with feet): 7.65" (19.4cm)

Height (without feet): 6.97" (17.7cm)

Width: 17.75" (45.1cm)

Depth: 19.83" (50.4cm)

*See dimensions diagram on the next page.

Weight • Net weight: Nº531H: 52.5 lbs (23.8kg)

Nº532H: 74.0 lbs (33.6kg)

Nº533H: 90.0 lbs (40.8kg)

Shipping weight: Nº531H: 62.5 lbs (28.4kg)

Nº532H: 84.0 lbs (38.1kg)

Nº533H: 100.0 lbs (45.4kg)

Operating Environment • Operating temperature: 0º to 35ºC (32º to 95ºF)

Storage temperature: –30º to 75ºC (–22º to 167ºF)

Relative humidity: 95% maximum without condensation

Image 28
Contents No500H Series Power Amplifier FCC Notice Important Safety Instructions IiiDocumentation Conventions Safety Terms & SymbolsMark Levinson Table of Contents Product Description What’s in the Box IntroductionShipping box includes Installation Considerations Unpacking Placement and VentilationPower Requirements Operating States Standby Button Front PanelStatus LED Power Switch Rear PanelAudio Channel Inputs Loudspeaker Binding PostsSingle-Ended Inputs Balanced InputsTrigger Input and Output Ethernet Port AC Input Standby mode is powered on when 3-12VDC is received onExternal control and networking. The Nº500H series supports Network Setup Material RequirementsConnecting the Cables To Connect Using a RouterComputer Requirements To Connect Without a RouterNetwork Setup Parameters Connecting With Dhcp Recommended On the computer, open the Internet Explorer Web browserSetting Up Computer Network Setup for Windows XPConnecting With Static IP Addressing Network Setup for WindowsTo change the host name of the amplifier To change the IP address of the amplifierEarlier Setting up the Computer procedure for instructions Direct ConnectionMasters and Slaves Connecting Devices ML NetDiscovering Slaves Status Reporting Fault Reporting Figure below illustrates a typical ML Net setupTroubleshooting No Power No OutputExamine the electrical circuit breaker to ensure that power Can’t Assign in ML NetEnsure that the local DNS server is properly configured No Response to Commands in ML NetNo Connectivity Via Ethernet If All Else Fails Fault Protection ML Net Fault ConditionsFault condition no longer exists DamageRestoring Factory Defaults Care & MaintenanceNº531H, 532H, 533H Specifications Nº535H Specifications Declaration of Conformity 2004/108/EC and 2006/95/EC, as amended

500H specifications

The Mark Levinson 500H is a sophisticated audio amplifier that exemplifies the brand's commitment to high-quality sound reproduction and advanced engineering. Renowned for its exceptional performance and aesthetic appeal, the 500H is a powerful addition to any high-fidelity audio system.

One of the standout features of the Mark Levinson 500H is its hybrid design, which combines both solid-state and tube amplification technologies. This hybrid approach allows for the warm, natural sound characteristics typically associated with tube amplifiers, along with the power and control that solid-state technology offers. This results in an amplifier that can handle a wide range of musical genres while delivering an engaging listening experience.

The 500H boasts a robust power output, providing up to 200 watts per channel into 8 ohms, which ensures ample power for driving even the most demanding speakers. Additionally, its advanced Class AB topology allows for efficient power delivery, minimizing distortion and maximizing headroom. The amplifier is also equipped with a unique auto-biasing feature that ensures optimal performance across different listening levels, preserving sonic integrity at all times.

In terms of connectivity, the Mark Levinson 500H offers a comprehensive array of options. It includes balanced XLR and unbalanced RCA inputs, allowing for flexible integration into various audio systems. Furthermore, it features a robust digital-to-analog converter (DAC) that supports high-resolution audio formats, enabling audiophiles to enjoy music in superior quality.

The design of the 500H is nothing short of stunning, with a sleek chassis that reflects the brand's luxury ethos. The front panel includes intuitive controls and a high-resolution display, making it easy for users to navigate through settings and make adjustments.

Attention to detail is evident in the build quality of the 500H, which features high-end components that enhance reliability and longevity. Every aspect of the amplifier has been meticulously designed to ensure optimal performance, from the premium capacitors to the custom transformers.

Overall, the Mark Levinson 500H is more than just an amplifier; it's a statement piece that delivers both aesthetic pleasure and unparalleled audio performance. Whether for critical listening or casual enjoyment, it embodies the pinnacle of audio engineering and is sure to impress even the most discerning audiophiles.