Mark Levinson 500H Fault Protection, ML Net Fault Conditions, Fault condition no longer exists

Page 26

Mark Levinson

Fault Protection

The Nº500H series is designed to prevent damage to themselves and associated components. These extensive features protect both the critical circuitry of the amplifier itself and shield connected loudspeakers from serious damage due to high-power levels.

Basic protections designed into the Nº500H series include fuses on each amplifier channel to protect against excessive current conditions, such as driving shorted outputs. Inrush limiting prevents premature aging of the power supply components during power-up; once the power supply has been charged, this feature goes off-line until the amplifier is powered up again.

The Nº500H series actively monitors operating temperature, output current demands and the presence of DC on the outputs. The amplifier will shut down under any of these conditions and report the fault via the front panel LED and over the Ethernet connection. The amplifier must be shut down to clear the fault condition before being powered back up.

22

ML Net Fault Conditions

 

The slave devices in an ML Net system can report fault conditions

 

to the master device. Fault condition reports are displayed on the

 

display of the master device when the fault occurs. Some faults

 

may cause the amplifier to enter Standby mode. Power-cycling the

 

amplifier clears the fault condition, providing the

 

fault condition no longer exists.

Note

 

Some faults do not allow power to be reapplied to the amplifier until

 

the fault condition no longer exists to protect the amplifier from

 

damage.

 

 

The fault conditions reported are:

•Slave Device DC Offset – indicates that the Nº500H series amplifier is experiencing a signal-related fault.

•Slave Device Over Current – indicates that the Nº500H series is experiencing an over-current condition.

•Slave Device Over Temperature – indicates that the Nº500H series amplifier is overheating.

•Signal – indicates that the Nº500H series has experienced a general signal fault.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents No500H Series Power Amplifier FCC Notice Important Safety Instructions IiiMark Levinson Safety Terms & SymbolsDocumentation Conventions Table of Contents Shipping box includes IntroductionProduct Description What’s in the Box Installation Considerations Unpacking Placement and VentilationPower Requirements Operating States Status LED Front PanelStandby Button Power Switch Rear PanelSingle-Ended Inputs Audio Channel InputsLoudspeaker Binding Posts Balanced InputsExternal control and networking. The Nº500H series supports Standby mode is powered on when 3-12VDC is received onTrigger Input and Output Ethernet Port AC Input Network Setup Material RequirementsComputer Requirements Connecting the CablesTo Connect Using a Router To Connect Without a RouterNetwork Setup Parameters Connecting With Dhcp Recommended On the computer, open the Internet Explorer Web browserSetting Up Computer Network Setup for Windows XPConnecting With Static IP Addressing Network Setup for WindowsTo change the host name of the amplifier To change the IP address of the amplifierEarlier Setting up the Computer procedure for instructions Direct ConnectionMasters and Slaves Connecting Devices ML NetDiscovering Slaves Status Reporting Fault Reporting Figure below illustrates a typical ML Net setupExamine the electrical circuit breaker to ensure that power TroubleshootingNo Power No Output Can’t Assign in ML NetNo Connectivity Via Ethernet If All Else Fails No Response to Commands in ML NetEnsure that the local DNS server is properly configured Fault condition no longer exists Fault ProtectionML Net Fault Conditions DamageRestoring Factory Defaults Care & MaintenanceNº531H, 532H, 533H Specifications Nº535H Specifications Declaration of Conformity 2004/108/EC and 2006/95/EC, as amended

500H specifications

The Mark Levinson 500H is a sophisticated audio amplifier that exemplifies the brand's commitment to high-quality sound reproduction and advanced engineering. Renowned for its exceptional performance and aesthetic appeal, the 500H is a powerful addition to any high-fidelity audio system.

One of the standout features of the Mark Levinson 500H is its hybrid design, which combines both solid-state and tube amplification technologies. This hybrid approach allows for the warm, natural sound characteristics typically associated with tube amplifiers, along with the power and control that solid-state technology offers. This results in an amplifier that can handle a wide range of musical genres while delivering an engaging listening experience.

The 500H boasts a robust power output, providing up to 200 watts per channel into 8 ohms, which ensures ample power for driving even the most demanding speakers. Additionally, its advanced Class AB topology allows for efficient power delivery, minimizing distortion and maximizing headroom. The amplifier is also equipped with a unique auto-biasing feature that ensures optimal performance across different listening levels, preserving sonic integrity at all times.

In terms of connectivity, the Mark Levinson 500H offers a comprehensive array of options. It includes balanced XLR and unbalanced RCA inputs, allowing for flexible integration into various audio systems. Furthermore, it features a robust digital-to-analog converter (DAC) that supports high-resolution audio formats, enabling audiophiles to enjoy music in superior quality.

The design of the 500H is nothing short of stunning, with a sleek chassis that reflects the brand's luxury ethos. The front panel includes intuitive controls and a high-resolution display, making it easy for users to navigate through settings and make adjustments.

Attention to detail is evident in the build quality of the 500H, which features high-end components that enhance reliability and longevity. Every aspect of the amplifier has been meticulously designed to ensure optimal performance, from the premium capacitors to the custom transformers.

Overall, the Mark Levinson 500H is more than just an amplifier; it's a statement piece that delivers both aesthetic pleasure and unparalleled audio performance. Whether for critical listening or casual enjoyment, it embodies the pinnacle of audio engineering and is sure to impress even the most discerning audiophiles.
Top Page Image Contents