Mark Levinson 500H owner manual Nº535H Specifications

Page 29

Nº500H Series Power Amplifier

 

Nº535H Specifications

 

All specifications are subject to change without notice.

Input & Output Connectors

• five balanced XLR inputs per channel

 

• five unbalanced RCA inputs per channel

 

• five pairs loudspeaker outputs with banana-plug sockets

 

per channel (banana-plug socket not available on the

 

230 VAC models)

Control Connectors

• one Ethernet 10Base-T port

 

• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc

 

• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc

 

3-pin IEC standard power connector

Rated Output Power

20Hz to 20kHz at <0.5% THD, 200W per channel @ 8 Ω, full

 

output from 1.84Vrms

Frequency Response

within 0.5dB from 10Hz to 20kHz

Signal-to-Noise Ratio

>85dB, reference level: 2.83 Vrms

 

25

Input Impedance

60 kΩ (balanced); 30 kΩ (unbalanced)

Voltage Gain

26.8dB

Input Sensitivity

2.83Vrms output at 130mVrms input

Power Requirements

100V~, 120V~, 230V~, 1000W, factory set for destination country

Dimensions*

• Height (with feet): 7.65" (19.4cm)

 

• Height (without feet): 6.97" (17.7cm)

 

• Width: 17.75" (45.1cm)

 

• Depth: 19.83" (50.4cm)

 

*See dimensions diagram on the next page.

Weight

• Net weight: 98.5 lbs (44.7kg)

 

• Shipping weight: 108.5 lbs (49.2kg)

Operating Environment • Operating temperature: 0º to 35ºC (32º to 95ºF)

Storage temperature: –30º to 75ºC (–22º to 167ºF)

Relative humidity: 95% maximum without condensation

Image 29
Contents No500H Series Power Amplifier FCC Notice Iii Important Safety InstructionsMark Levinson Safety Terms & SymbolsDocumentation Conventions Table of Contents Shipping box includes IntroductionProduct Description What’s in the Box Unpacking Placement and Ventilation Installation ConsiderationsPower Requirements Operating States Status LED Front PanelStandby Button Rear Panel Power SwitchLoudspeaker Binding Posts Audio Channel InputsSingle-Ended Inputs Balanced InputsExternal control and networking. The Nº500H series supports Standby mode is powered on when 3-12VDC is received onTrigger Input and Output Ethernet Port AC Input Material Requirements Network SetupTo Connect Using a Router Connecting the CablesComputer Requirements To Connect Without a RouterNetwork Setup Parameters On the computer, open the Internet Explorer Web browser Connecting With Dhcp RecommendedNetwork Setup for Windows XP Setting Up ComputerNetwork Setup for Windows Connecting With Static IP AddressingTo change the IP address of the amplifier To change the host name of the amplifierDirect Connection Earlier Setting up the Computer procedure for instructionsML Net Masters and Slaves Connecting DevicesFigure below illustrates a typical ML Net setup Discovering Slaves Status Reporting Fault ReportingNo Power No Output TroubleshootingExamine the electrical circuit breaker to ensure that power Can’t Assign in ML NetNo Connectivity Via Ethernet If All Else Fails No Response to Commands in ML NetEnsure that the local DNS server is properly configured ML Net Fault Conditions Fault ProtectionFault condition no longer exists DamageCare & Maintenance Restoring Factory DefaultsNº531H, 532H, 533H Specifications Nº535H Specifications 2004/108/EC and 2006/95/EC, as amended Declaration of Conformity

500H specifications

The Mark Levinson 500H is a sophisticated audio amplifier that exemplifies the brand's commitment to high-quality sound reproduction and advanced engineering. Renowned for its exceptional performance and aesthetic appeal, the 500H is a powerful addition to any high-fidelity audio system.

One of the standout features of the Mark Levinson 500H is its hybrid design, which combines both solid-state and tube amplification technologies. This hybrid approach allows for the warm, natural sound characteristics typically associated with tube amplifiers, along with the power and control that solid-state technology offers. This results in an amplifier that can handle a wide range of musical genres while delivering an engaging listening experience.

The 500H boasts a robust power output, providing up to 200 watts per channel into 8 ohms, which ensures ample power for driving even the most demanding speakers. Additionally, its advanced Class AB topology allows for efficient power delivery, minimizing distortion and maximizing headroom. The amplifier is also equipped with a unique auto-biasing feature that ensures optimal performance across different listening levels, preserving sonic integrity at all times.

In terms of connectivity, the Mark Levinson 500H offers a comprehensive array of options. It includes balanced XLR and unbalanced RCA inputs, allowing for flexible integration into various audio systems. Furthermore, it features a robust digital-to-analog converter (DAC) that supports high-resolution audio formats, enabling audiophiles to enjoy music in superior quality.

The design of the 500H is nothing short of stunning, with a sleek chassis that reflects the brand's luxury ethos. The front panel includes intuitive controls and a high-resolution display, making it easy for users to navigate through settings and make adjustments.

Attention to detail is evident in the build quality of the 500H, which features high-end components that enhance reliability and longevity. Every aspect of the amplifier has been meticulously designed to ensure optimal performance, from the premium capacitors to the custom transformers.

Overall, the Mark Levinson 500H is more than just an amplifier; it's a statement piece that delivers both aesthetic pleasure and unparalleled audio performance. Whether for critical listening or casual enjoyment, it embodies the pinnacle of audio engineering and is sure to impress even the most discerning audiophiles.