Important Safety Instructions

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

	The exclamation point within an equilateral triangle is
	intended to alert the user to the presence of important
	operating and maintenance (servicing) instructions in
2	the literature accompanying the appliance.

Marking by the “CE” symbol (shown left) indicates compliance of this device with the EMC (Electromag- netic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

Please read all instructions and precautions carefully and completely before operating your Mark Levinson power amplifier.

1.ALWAYS disconnect the entire system from the AC mains before connecting or disconnecting any cables, or when cleaning any component.

2.This product must be terminated with a three-conductor AC mains power cord that includes an earth ground connection. To prevent shock hazard, all three connections must ALWAYS be used.

3.AC extension cords are not recommended for use with this product.

4.NEVER use flammable or combustible chemicals for cleaning audio components.

5.NEVER operate this product with any covers removed.

6.NEVER wet the inside of this product with any liquid, or pour/ spill liquids directly onto this unit.

7.NEVER block airflow through ventilation slots or heat sinks.

8.NEVER bypass any fuse or replace any fuse with a value or type other than those specified.