Mark Levinson 433 owner manual Unpacking, Product Registration

Page 6
Product Registration

Warning!

Caution!

6

Product Registration

Mark Levinson

Unpacking

DO NOT attempt to lift or move the Nº433 without adequate assistance. Failure to follow the procedures included in this section may result in personal injuries and/or product damage.

The Nº433 is a massive power amplifier. The Nº433 ships at 130.5 pounds (59.2kg). Rear panel handles are provided for safe, conve- nient lifting and moving. Proper lifting requires at least two people.

DO NOT attempt to lift the Nº433 from its packing carton alone.

DO NOT attempt to lift the Nº433 while bending at the waist. When lifting, stand as straight as possible using the leg muscles to lift.

When unpacking the Nº433:

DO save all packing materials for possible future shipping needs.

DO inspect the Nº433 for signs of damage during shipment. If damage is discovered, contact an authorized Mark Levinson dealer for assistance making appropriate claims.

Please register the Nº433 within 15 days of purchase. To do so, register online at www.marklevinson.com or complete and return the included product registration card. Product registration serves no warranty purposes. Retain the original, dated sales receipt as proof of warranty coverage.

Image 6
Contents No433 Power Amplifier Important Safety Instructions FCC Notice Important Safety Instructionsoperate the equipment 2005 Harman Specialty Group. All rights reserved Table of Contents Unpacking Product RegistrationInstallation Considerations PlacementVentilation Mark Levinson Power Requirements Warm-up& Break-InPeriod2. Sleep Mode Operating States1. Off 3. StandbySpecial Design Features Massive Power Supply Balanced DesignExtensive Protection These fault conditions includeMark Levinson Front Panel 1. Indicator LED2. Power Button 3. Standby ButtonMark Levinson Rear Panel 1. Rear Panel Handles2. Loudspeaker Binding Posts Outputs 3. Unbalanced Input 5. RS-232Communications Port Nº433 Power Amplifier4. Balanced Input 6. Communication Ports7. trigger in and out connectors 8. power save mode switchMark Levinson Danger 9. ~ac mains connectorLinking Making Link Connectionscommunication port specifications for other Constructing Link Communication CablesNº433 Power Amplifier tation for Link orComponent Creating a Slave ChainMark Levinson Requirements and ConnectionsTo create a slave chain that includes the Nº433 Nº433 Power AmplifierPower Amplifier No40 Media ConsoleMark Levinson Power Amplifier Link ControlsNº433 Power Amplifier Note the followingTroubleshooting DangerNº433 Power Amplifier 8. The amplifier keeps powering off 9. If all else failsMark Levinson Care & Maintenance Nº433 Power AmplifierSignal to Noise ratio Input impedance SpecificationsRated power output Frequency response Power consumption Mains voltageStandards to which Conformity is Declared Declaration of ConformityApplication of Council Directives ManufacturerMark Levinson Dimensionsstandby power 17.75 45.09 cmRack-Mounting Part No. 070-630694 Rev 1 09/05