Edimax Technology EW-7711UMN, EW-7711UAN manual Wpa

will be selected automatically, and please do not change it.

If you select ‘LEAP’, you’ll be prompted to input LEAD specific settings:

	Please input LEAP identity, password, domain name, and select
	encryption type. You can check ‘Show Password’ box so the
	password you inputted will be displayed as you type, but not replace
	by asterisk.
	Select the encryption type of the wireless access point or wireless
Encryption	device you wish to connect. When you’re adding a profile from an
	existing access point or wireless device, the encryption type will be
	selected automatically, and please do not modify it.
WPA	Input WPA preshared key here. If encryption is not enabled, or you
Preshared	select ‘WEP’ as encryption type, this field will be disabled and
Key	grayed out.
	You can select key type (Hexadecimal or ASCII) and input WEP key
	here. If encryption is not enabled, or you select ‘WPA’ as encryption
	type, this field will be disabled and grayed out. You can set up to 4
	WEP keys here.
	There are two types of WEP key: Hexadecimal and ASCII. For
WEP Key	Hexadecimal key, you can input number 0-9 and alphabet a-f; for
	example, ‘001122aabbcc’; For ASCII key, you can input number 0-9
	and alphabet a-z; for example, mywepkey12345.
	The length of WEP key depends on the type of WEP key you
	selected. You can input 10 or 26 hexadecimal characters and 5 or 13
	ASCII characters as WEP key.
Show	Check this box and all passphrases or security keys you inputted will
Password	be displayed as you type, but not replace your input with asterisk.
	If the access point you wish to connect requires 802.1x
Use 802.1x	authentication, please click on ‘Use 802.1x’ box, then click ‘802.1X’
	tab to set 802.1x parameters.
	25