Edimax Technology EW-7711UAN, EW-7711UMN Select 802.1x EAP method from dropdown menu. Please ask

To set 802.1x authentication for the access point. Please click ‘802.1X’ tab:

Here are descriptions of every setup item:

Item Name	Description
	Select 802.1x EAP method from dropdown menu. Please ask the
EAP Method	administrator of the access point you wish to connect to select a
	correct EAP method.
	Select 802.1x tunnel authentication type from dropdown menu.
	Please ask the administrator of the access point you wish to connect
	to select a correct tunnel authentication method. This pull down
	menu is only available when authentication type you use is 'PEAP',
	‘TLS / Smart Card', or 'TTLS'.
	When you use 'EAP-FAST' as authentication type, the protocol
	setting is always 'Generic Token Card' and can not be changed. You
	also need to select ‘Soft Token’ or ‘Static Password’ as password in
Tunnel	‘ID \ Password’ setting.
Authentication	’EAP Fast’ authentication type also have a sub-menu to set EAP
	fast-specific parameters:

If you need to use protected authentication credential, check ‘Use protected authentication credential’ box, and click ‘Import’ to

26