Edimax Technology EW-7711UAN manual Please select a wireless authentication type you wish to use

Here are descriptions of every setup item:

Item Name	Description
	Please select a wireless authentication type you wish to use.
Authentication	Available options are ‘Open’, ‘Shared’, WPA-PSK’, ‘WPA2-PSK’,
Type	and ‘WPA-PSK / WPA2-PSK’. If you want to disable wireless
	data encryption, you must select ‘Open’.
	Please select an encryption mode. The available options in this
	setting item will vary depending on the authentication type you
Encryption Type	select. If you select ‘Not Use’, data will not be encrypted and
	people with some networking knowledge will be able to read the
	data you transfer with proper tool.
	Please input the WPA pre-shared key here. Only clients with the
WPA Pre-shared	same pre-shared key you inputted here will be able to connect to
Key	your computer. This setting is only available when you select
	one of WPA encryptions.
	You can specify the time interval to re-issue the key to your
Group Rekey	wireless clients here. You can click the button ’10 seconds’ or
	‘Kpackets’ to change the unit of time interval. (every 10 seconds
Interval
	or a thousand data packets times the value you specified in
	‘Group Rekey Interval’ field).
	Please input the WEP encryption key here when you select
	‘WEP’ as encryption type. There are 2 types of WEP key: Hex
	(number 0 to 9, and ASCII characters A to F) and ASCII (all
	alphanumerical characters plus symbols). Please select the type
	of WEP key first, and then input the WEP key according to the
	type of WEP key you selected.
WEP Key
	If you want to use WEP 64 bits encryption, please input 10
	characters if you select HEX, or input 5 characters if you select
	ASCII. If you want to use WEP 128bits encryption, please input
	26 characters if you select HEX, or input 13 characters if you
	select ASCII. 128 bits encryption is safer then 64 bits, but the
	data transfer speed will be slightly reduced.
Show Password	Check this box and the WPA pre-shared key or WEP key you
	inputted will be shown, but not replaced by asterisk (*).

When you finish with setting and want to save changes, click ‘OK’ button, or click ‘Cancel’ button to discard all changes you made.

56