Dell manual Deploying the Dell PowerConnect 8100 with the Cisco Catalyst

Page 2

Deploying the Dell PowerConnect 8100 with the Cisco Catalyst

This document is for informational purposes only and may contain typographical errors and technical inaccuracies. The content is provided as is, without express or implied warranties of any kind.

© 2013 Dell Inc. All rights reserved. Dell and its affiliates cannot be responsible for errors or omissions in typography or photography. Dell, the Dell logo, and PowerEdge are trademarks of Dell Inc. Intel and Xeon are registered trademarks of Intel Corporation in the U.S. and other countries. Microsoft, Windows, and Windows Server are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell disclaims proprietary interest in the marks and names of others.

January 2013 Rev 1.1

ii

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Deploying Dell PowerConnect 8100 and Cisco Catalyst Switches Deploying the Dell PowerConnect 8100 with the Cisco Catalyst Contents Dell PowerConnect Dell PowerConnect 8164FManagement Vlan vs. SVI on the Cisco Catalyst Overview of VLANsCreating and assigning VLANs Management Vlan across a Dell PowerConnect Dell PowerConnect 8100 CLICat6504E1#configure terminal Cisco Catalyst CLIAccess, trunk and general Switchport Modes Applying Vlan changes may take few minutes. Please waitVlan configuration example Tagged Cat6504E1config-if#spanning-tree portfast edge Pvid and native VlanCisco Catalyst CLI Creating and connecting LAGs using Lacp Method 1 Portfast RstpConsoleconfig#spanning-tree priority Cisco proprietary protocols Method 2 MstpDeploying the Dell PowerConnect 8100 with the Cisco Catalyst Appendix a Network switch versions
Top Page Image Contents