w w w . d e l l . c o m s u p p o r t . d e l l . c o m
2Click OK to save the settings and return to the Setup dialog box. Click X or press <Escape> to return to the Main dialog box.
3Click Commands. The Commands dialog box displays.
4Click the Broadcast Enable checkbox to activate broadcasting. The Broadcast Enable Confirm/Deny dialog box displays.
5Click OK to enable the broadcast. Click X or press <Escape> to cancel and return to the Commands dialog box.
6If broadcasting is enabled, type the information and/or perform the mouse movements that you would like to broadcast from the user station. Only devices in the list are accessible.
NOTE: Any other user is disabled when broadcast mode is enabled.
To turn broadcasting off:
From the Commands dialog box, clear the Broadcast Enable checkbox.
44