Dell 2.3 manual

12.To display the boot order options, expand Boot Order, and then click Edit to make updates:

NOTE: For Dell 13th generation PowerEdge Servers, only the current boot mode details are displayed for the hardware profiles.

NOTE: Operating system deployment from OpenManage Integration for VMware and vCenter fails if the BOOT mode in the target machine is set to UEFI

a.In the Boot Mode drop-down list to select either BIOS or UEFI.

b.In the View/Configure drop-down list, under Boot Device Sequence, to make changes to the boot device sequence displayed, select the device and click either Move Up or Move Down.

c.In the Boot Retry Sequence drop-down list, select Enabled so that the server automatically retries the boot sequence, or select Disabled to not retry the sequence.

d.Click Save to save the changes, or Cancel to cancel the changes.

13.If the BIOS boot mode was selected, you can expand Hard Drive Sequence to display the hard drive sequence options, and click Edit to make updates:

• To make changes to the hard drive sequence displayed, select the device and click either Move Up or Move Down.

• Click Save to save the changes, or Cancel to cancel the changes.

14.In the left pane, select BIOS Settings. To include BIOS setting information in the profile, select the Include BIOS Settings in this Hardware Profile check box. Expand a category to display the setting options, and click Edit to make updates to one of the following:

• Memory Settings

• Processor Settings

• SATA Settings

• Integrated Devices

• Serial Communication

• Embedded Server Management

• Power Management

• System Security

• Miscellaneous Settings

Once all updates are made for a category, click Apply to save the changes or click Cancel to cancel the changes.

NOTE: For detailed BIOS information, including setting options and explanations, refer to the Hardware Owner’s Manual for the selected server.

15.In the left pane, select iDRAC Settings and then select Network.

16.To include network setting information in the profile, select the Include Network Settings in this Hardware Profile check box. Expand a category to display the setting options, and click Edit to make updates to one of the following:

•Network

•Network Settings

•Virtual Media

Once all updates are made for a category, click Apply to save the changes or click Cancel to cancel the changes.

NOTE: For detailed iDRAC information, including setting options and explanations, refer to the iDRAC User’s Guide for the selected server.

17.In the left pane, select iDRAC Settings → User List. To include user list information in the profile, select the Include User List in this Hardware Profile check box. Under iDRAC Local User List, do one of the following:

58