Output Input | Furuno FE-700 specification

3.2 System Menu 1

DEPTH UNIT: Selects unit of depth measurement among meters, feet, or fathoms. Default setting is meters.

If "ft" or "fa" is selected, the depth unit is shown in red characters.

SPEED UNIT: Selects unit of speed measurement among knots, statute miles per hour, or kilometers per hour. Default setting is knots. Requires speed data, from external device.

COURSE: Selects heading reference; true or magnetic. Default setting is TRUE.

BOTTOM LOST: Turns on or off the bottom loss warning. “ALARM” sounds the alarm if the bottom signal is not detected. Default setting is “ALARM” (alarm is enabled).

GPS ALARM: The audible alarm may be released when the position-fixing mode is switched from DGPS to GPS and vice versa. Default setting is “ALARM” (alarm is enabled). Choose “OFF” if you do not need to be alerted with the audible alarm when the position-fixing mode is switched.

INTERFACE: Selects I/O signal format between the FE-700 and external equipment; IEC format “1:95” (1995 version) or “1:98” (1998 version), or NMEA format. Default setting is IEC “1:98”.

When selecting the “1:98”, DPT has max. range in use (See page 24).

	Output	Input
IEC 61162-1	DPT	RMA, RMC
		GLL, VTG
		ZDA, GGA
NMEA 0183	DBT (Ver.1.5)	RMA, RMC
	DBS (Ver.1.5)	GLL, VTG
	DPT (Ver.2.0)	ZDA, GGA

ALARM SOUND: Selects audio alarm sound among 1, 2 or 3. Default setting is 1.

1:Continuous sound

2:Intermittent sound; 0.5 s on and 0.5 s off.

3:Intermittent sound; 1 s on and 1 s off.

OS DATA: Selects own ship data display mode; DATA 1 or DATA 2. DATA1 is the default setting. If a navigation device is not connected to the FE-700, select DATA 2.

LANGUAGE: Currently English is only available.

3.3 System Menu 2

TIME ADJUST: Selects internal clock or external clock (UTC clock). Default setting is INTERNAL. For INTERNAL, set current day, month, year, hour, minute and second with [+], [-], [▼] or [▲] key. The setting clock appears and it counts upward.

SYSTEM MENU 2

MENU SELECT	1	2	3
TIME ADJUST	INTERNAL			EXTERNAL
DAY	1
MONTH	JAN
YEAR	2001		(∼ 2100)
HOUR	0		(0∼ 23)
MINUTE	0		(0∼ 59)
SECOND	0		(0∼ 59)

01 JAN 2001 00:00:00

▼▲: To select item

- +: To set option

Select other mode to exit.

If EXTERNAL is selected, the screen changes as follows.

SYSTEM MENU 2

MENU SELECT	1	2 3
TIME ADJUST	INTERNAL			EXTERNAL
TIME DIFFERENCE			AUTO	MANUAL

0:22:40

▼▲: To select item

-+: To set option Select other mode to exit.

TIME DIFFERENCE: Selects auto (UTC) or manual. Auto uses the time difference in ZDA (IEC 61162-1). In manual, it is necessary to enter the time difference in hours and minutes.