Furuno FE-700 manual Echo Quality Setting, Demonstration Display, Transducer Setting

4ECHO QUALITY SETTING

This chapter describes functions useful for improving echo sounding performance.

4.1 Demonstration Display

The demonstration program shows how the FE-700 works.

1.Turn off the equipment.

2.Press the POWER Switch while pressing any key. Release the key when the following EXTENSION MODE display appears.

EXTENSION MODE

+ : TRANSDUCER SETTING

- : TEST

▲: CLEAR MEMORY

▼: DEMONSTRATION

SELECT MODE

3.Press the [▼] key to select

DEMONSTRATION. DEMONSTRATION

	OFF	ON
-/+:	To set option
▼:	EXTENSION MODE

4.Press the [+] key to select ON.

5.Reset the power. "DEMO" appears above the depth indication on the echo sounder displays and at the top right-hand corner on the data and graphic displays.

!To return to the normal operation, select OFF at step 4 above. Restart the display unit after waiting 5 s.

4.2 Transducer Setting

After installing the equipment, set the transducer as follows.

1.Press the [+] key at the EXTENSION MODE display. The following window appears.

TRANSDUCER SETTING

XDR	FORE	N/A	50kHz	200kHz
XDR	AFT	N/A	50kHz	200kHz

▼▲: To select item

-+: To set option

2.Set as follows by using [▲] or [▼] to select an item and [+] or[-] to set option.

a)If only one transducer is installed, set XDR FORE field to 50 kHz or 200 kHz, according to actual installation. Leave the XDR AFT field as “N/A.”

b)If two transducers are installed via the switch box EX-8, set XDR FORE field and XDR AFT field to 50 kHz or 200 kHz, according to actual installation.

3.Reset the power.

Note: The default settings in the TRANSDUCER SETTING window are N/A. At the first power-up after installation, the window appears to set transducer(s).

14