8.If you selected "Channel" enter ITU channel number (see ap- pendix) or User channel number (see page
If you selected the "ScanTable", press the [ 
] key to show a scan group list registered (see page 
] or [ 
] key followed by pressing the [Enter] key.
Scanning Group List
FURUNO
CHOUSHI
9.Press the [Enter] key. The prompt OK/CANCEL asks for veri- fication of data.
CREATE
CHANGE
O K
CANCEL
Figure 3-6 OK/CANCEL prompt
10.If the data are correct, press the [Enter] key. (To cancel entry, place cursor on CANCEL by pressing the [ 
] key, and then hit the [Enter] key. Data entered are erased.)
To register other stations, select Create again and then press the [Enter] key. Repeat steps 3 – 10.
To confirm the data registered, press the [ 
] key to get into the Station Set Up window.
Note: If you enter a station which exists the indication "Station by that name already exists. Press any key to escape." appears. Press any key to return to the Station List. Check the list.
Editing/Deleting Stations
1.Press function key [F5] and then the [1] key.
2.Select station from the Station List.
3.Select Change and press the [Enter] key.