4.2 Saving a File
Before you can save a file to a floppy disk, the disk must be for- matted. 2HD Type is only available.
Formatting Floppy Disks
1.Press function key [F1].
2.Press the [0] key to select "Floppy Disk Format".
3.Press the [−] key to select "YES".
4.Press the [Enter] key.
5.Insert a new floppy disk and press the [Enter] key.
Saving a File
1.Press function key [F1] to display the File menu.
2.Press the [3] key. The screen should look something like Fig- ure
Close Text
Save file ?
( UNTITLED1 )
Yes
No
Figure 4-2 Close text screen
3.Press the [Enter] key. Enter file name, using up to eight charac- ters.
You may use any alphabet or numeric on the keyboard. But you may not use the following punctuation symbols;
!
: " > < ;
You may add an extension at the end of the file name, for ex- ample, .TXT, to distinguish text file from macro file.
4. Press the [Enter] key.
Note: When the working area is full, the message "File can't open" appears. Then, you would close a file to clear a working area in order to open the file desired.