Clarion APX600.5 manual Connections, High-pass/Low-pass Filter Controls

Page 4

CONNECTIONS

4

APX600.5 Power System Amplifier

•Gold-Plated RCA Input Connectors -The Input Connections are Gold- Plated RCA Jacks and are labeled as Right Front, Left Front, Right Rear, Left Rear, Right Sub and Left Sub.

•Gain Controls - The Gain Controls provide a wide adjustment range to accommodate output levels from any brand of source unit. Seperate Front, Rear, and Sub Gain Controls allow you to set the nominal operating level of the amplifier. The amplifier ranges are 250mV to 2.5V for RCA inputs and 500mV to 5V for speaker level inputs.

•Bass Boost Control - The amplifier also features a “high-Q” (i.e. narrow frequency band) Bass Boost circuit for the subwoofer output. It acts much like an equalizer, with an adjustable gain (from 0 to +15dB) fixed at 45Hz. Use this feature to tune low-frequency audio response to compensate for a less than ideal subwoofer enclosure design. The added boost produces rich, full bass tones that are normally difficult to reproduce in the car audio environment. Note: If Bass Boost is undesired, set Bass Boost to 0dB.

High-pass/Low-pass Filter Controls

•Freq (Hz) Controls - The front crossover frequency is fully adjustable between 55Hz and 5.5KHz (via the front crossover frequency multiplier). The rear crossover frequency is fully adjustable between 55Hz and 5.5 KHz (via the Rear Crossover Frequency Multiplier) for a wide range of crossover points. Use this feature, along with your speaker manufacturer’s specs to adjust to recommended crossover frequencies (see Applications on page 6.) NOTE: If either of the X-Over Mode Switches is set to FULL RANGE, varying the Freq (Hz) Control will produce no effect.

•Front X-Over Frequency Multiplier Switch - When engaged, this switch increases the crossover frequency of the front channels by a factor of 10. Example: If the Freq (Hz) dial is set for 240Hz, pushing in the Multiplier Switch changes the setting to 2400Hz.

•Speaker Level Inputs - These provide connections for a high-level stereo source. In addition, these connections are provided for installations where the source unit’s RCA outputs are unavailable such as OEM radios.

WARNING: When using the speaker (high-level) inputs, the Black wire must be grounded at the Radio. Failure to do this will result in noise and improper operation.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page About the Manual and Warranty Table of ContentsPutinroductiontitle Here IntroductionDescription Input Connections and Audio ControlConnections High-pass/Low-pass Filter ControlsConnections for Power and Speakers Crossover Selection SwitchesFlow Chart Use this flow chart to set up the Crossover SwitchesApplications ApplicationsMid Bass Midrange Channel System Channels High-Pass Plus Sub Mounting Precautions InstallationWiring Precautions Installation Electrical connections for the APX600.5Setting the Crossover Setting the GainSetting the Bass Boost Troubleshooting Final System CheckTroubleshooting Product SpecsAPX600.5-10Rev.1 02/01

APX600.5 specifications

The Clarion APX600.5 is a versatile and high-performance 5-channel amplifier designed for car audio enthusiasts who demand exceptional sound quality and power. With its compact design and impressive specifications, this amplifier stands out as a reliable solution for enhancing the audio experience in any vehicle.

One of the main features of the APX600.5 is its power output. This amplifier delivers up to 600 watts of peak power, making it suitable for driving a combination of speakers and subwoofers effectively. The RMS power rating of 75 watts per channel at 4 ohms ensures that it can handle a variety of audio setups, allowing users to configure their systems as they see fit. Its ability to drive multiple channels simultaneously also makes it an efficient choice for those looking to maximize their audio setup without the need for multiple amplifiers.

The APX600.5 utilizes advanced Class D technology, which ensures a high level of efficiency and reduced heat generation compared to traditional Class A/B amplifiers. This not only contributes to the longevity and reliability of the unit but also means that users can enjoy high power output without the worry of overheating. Additionally, the amplifier features a compact design that maximizes space in the vehicle, making it easier to install even in tight locations.

Another noteworthy characteristic of the Clarion APX600.5 is its extensive crossover capabilities. The amplifier is equipped with adjustable high-pass and low-pass filters that allow for precise tuning of audio frequencies. This feature helps users achieve optimal sound quality and maintain clarity even at high volumes.

The built-in protection circuitry is another key technology that sets this amplifier apart. It features short-circuit protection, thermal overload protection, and DC offset protection, which ensures safe operation and prevents damage to both the amplifier and the connected speakers.

The APX600.5 also boasts an elegant design with a sleek finish that complements any vehicle's interior. The intuitive layout and clear terminal labeling simplify installation and adjustments, making it user-friendly.

In summary, the Clarion APX600.5 is an excellent choice for car audio enthusiasts seeking power, efficiency, and flexibility in a single compact amplifier. With its advanced technologies and features, it delivers top-notch audio performance that enhances any driving experience.
Top Page Image Contents