Carrier Access Adit 3104 user manual 10/100Base-TX Ethernet, Ethernet RJ-45

Page 38

Electrical Installation & Cabling

Interface Connectors

10/100Base-TX Ethernet

The 10/100Base-TX Ethernet (female) ports provide connectivity for Router

WAN and/or LAN ports and for management connection via Telnet and/or

SNMP to a Network Management System.

Ethernet (RJ-45)

8

1

The pinouts are as follows:

Note: This is a hub pinout, you will need a straight cable to connect to a PC.

Pin

Name

Description

1

Receive +

Receive from network

2

Receive -

Receive from network

3

Transmit +

Transmit to network

4-5

N/C

Not connected

6

Transmit -

Transmit to network

7-8

N/C

Not connected

The LEDs are as follows:

LED	State	Description
Left LED	The left LED shall show Link Status.

	Off	Link Down

	Green	Link Up

	Flashing Green	Traffic on Link

	Yellow	Collision status

Right LED	The right LED shall	indicate Link Speed.

	Off	10 Mbit/sec, down or not connected

	Green	100 Mbit/sec

3-8	Adit 3104 - Release 1.6

Image 38

Contents Adit Page FCC Requirements, Part Safety of Information Technology EquipmentCompliance Preface Industry Canada ICES-003 Industry Canada CS-03Safety Information Electrostatic Discharge ESD Precautions Warranty Warranty ProcedureLimitation of Warranty & Limitation of Remedies Warranty Product Returns Table of Contents Configuration Physical InstallationElectrical Installation & Cabling Glossary IndexChapter Overview Carrier-Grade VoIP Service DeliverySimplified Configuration and Management Speed without Sacrificing Security and PerformanceSecure Mobile Worker Secure Access RoutingApplication Drawings Converged Network Appliance Hosted VoIP Business GatewayInterfaces Technical SpecificationsComponents Network StandardsRouting and Policy Management Voice SignalingVoice Processing and Mediation Power Quality of ServiceFirewall Features Router PerformanceEnvironment Regulatory ApprovalsPhysical Information Back ChassisFront Adit 3104 Base Platform Physical Installation Installation Environment Unpacking and InspectionUser Safety Compliant InstallationFerrite Beads Ferrite bead shipped with Adit chassisWall Mounting Rack Mounting To rack mount the Adit 3000, follow the instructions belowTray Slide Adit 3104, 3200, 3300 and 3400 Battery Backup Electrical Installation & Cabling Adit Adit ConnectionsFront of Adit Interface ConnectorsGrounding the Unit Back of AditBattery Connection AC/DC ConverterPair Telco Connector Pair Pin Function Color CodeRS-232 Craft Port Female DB-9 Direction DescriptionDS1/E1 Connection Ports DS1/E1 RJ-48C10/100Base-TX Ethernet Ethernet RJ-45Reset Button Alarm/Status LEDsAlarm/Status LEDs Configuration Windows 2000/98/Me PC Network ConfigurationWindows XP Windows NTLinux LAN ConnectionInternet Connection To access the management console Web-Based ManagementSetting up a CLI Connection Log Key Enabled Software Features Example config# key cxusdfutkj3diosn412CBasic Configuration Setup Adit 3104 for access via Web-BrowserRestore Factory Defaults Modify Default Admin User Configuration Configure Ethernet WAN Interface Web-browserSelect Apply to apply the new settings Configure Serial1 as WAN Select the Enable button Configure the Adit 3104 as a SIP Line Gateway Select Use SIP ProxyConfiguration Configuration Glossary Glossary NAT WAN BRI Dhcp FDL GUI LAN PAT PHY SAP VPN Virtual Local Area Network Vlan Glossary-14 Index Index