Carrier Access Adit 3104 user manual Pat

Glossary

Multilink PPP (MLPPP)

Multilink PPP (MLPPP)	MultiLink PPP. An extension to the point-to-point protocol that enables two channels to be
	linked together to double the throughput. It is used for ISDN transmission and channel
	bonding
Microsoft Point-to-Point	A 128-bit key or 40-bit key encryption algorithm using RSA RC4. MPPE provides for
Encryption (MPPE)	packet confidentiality between the remote access client and the remote access or tunnel
	server and is useful where IP security (IPSec) is not available. MPPE 40-bit keys are used
	to satisfy current North American export restrictions. MPPE is compatible with Network
	Address Translation.
modem	MOdulator-DEModulator, a device that takes digital computer signal, converts it to analog,
	and sends it across the phone line. Another modem on the reverse does the exact opposite
	action. Modems transfer data at different speeds or rates, called baud.
multiplexer	Electronic equipment which allows two or more signals to pass over one communications
	circuit. The circuit may be analog or digital
MUX	See multiplexer
NetBIOS	Network Basic Input/Output System.NetBIOS is a program that allows applications on
	different computers to communicate within a Local Area Network (LAN).
network	A set of computers linked to one another for data sharing, or the link itself.
Network Time Protocol	Network Time Protocol, developed to maintain a common sense of time among Internet
(NTP)	hosts around the world. Many systems on the Internet run NTP, and have the same time
	(relative to Greenwich Mean Time).
Non-Return to Zero	A binary encoding scheme in which ones and zeros are represented by opposite and
(NRZ)	alternating high and low voltages and where there is no return to a zero (reference) voltage
	between encoded bits.
Open Shortest Path First	Short for Open Shortest Path First, an interior gateway routing protocol developed for IP
(OSPF)	networks based on the shortest path first or link-state algorithm.
	Routers use link-state algorithms to send routing information to all nodes in an
	internetwork by calculating the shortest path to each node based on a topography of the
	Internet constructed by each node. Each router sends that portion of the routing table (keeps
	track of routes to particular network destinations) that describes the state of its own links,
	and it also sends the complete routing structure (topography).
	The advantage of shortest path first algorithms is that they results in smaller more frequent
	updates everywhere. They converge quickly, thus preventing such problems as routing
	loops and Count-to-Infinity (when routers continuously increment the hop count to a
	particular network). This makes for a stable network.
	Note: OSPF Version 2 is defined in RFC 1583. It is rapidly replacing RIP on the Internet.
packet	A packet consists of the data to be transmitted and certain control information.
PAP	Password Authentication Protocol
PAT	Port Address Translation

Glossary-10 Adit 3104 - Release 1.6