DATALOGIC | DS2400 |
2.3 JUNCTION BOX INSTALLATION
The Junction Box provides a passive connection between your scanner and the outside world in a fast and practical way. It represents an alternative to the
DS2400 | Junction Box |
Scanner cable | |
| |
| System cables |
Figure 2.3 - Scanner using Junction Box
For Junction Box connections, the scanner has a cable that terminates in a 24 pin connector that plugs into the junction box. The system cables pass through 6 glands in the side of the Junction Box and the individual wires connect to spring clamp terminal blocks inside which provide access to all scanner signals.
2.3.1 Junction Box Mounting
The diagram below shows the dimensions of the Junction Box and its relative mounting holes.
mm
inch
GLANDS PG7 n°6 |
Figure 2.4 - Junction Box Overall dimensions
Installation - 2.3