Datalogic Scanning DS2400 manual Mounting Junction Box

The Junction Box is designed to be mounted to a panel of metal, plastic or other appropriate material using the mounting screws provided in the package. To do this:

1)Open the junction box by unscrewing the 4 cover screws. If necessary, using the two mounting holes inside the junction box as a pattern, mark the panel with an appropriate object and then drill two small pilot holes in the panel.

Figure 2.5 - Mounting Junction Box

2)Align the junction box and insert the two self-threading screws with their washers and screw them into the panel until tight (see Figure 2.5).

2.4- Installation