DATALOGIC | DS2400 |
2.4.5 Outputs
There are two general purpose outputs. The following pins are present on the
Pin | Name | Function |
8 | OUT1+ | Output 1 + |
22 | OUT REF | Output reference |
11 | OUT2+ | Output 2 + |
12 | OUT REF | Output reference |
DS2400
11
OUT 2
12
OUT REF
and/or
DS2400 | USER INTERFACE Vext 40 Vdc max |
8OUT 1
22 OUT REF
Figure 2.23 Output 1 / Output 2 connections
The meaning of the two outputs OUT1 and OUT2 can be defined by the user. Refer to the WinHost Help On Line.
By default, OUT1 is associated with the No Read event, which activates when the code signalled by the external trigger is not decoded, and OUT2 is associated with the Right event, which activates when the code is correctly decoded.
These outputs are both level or pulse configurable.
2.5 POSITIONING
The DS2400 scanner is able to decode moving barcode labels at a variety of angles, however significant angular distortion may degrade reading performance.
When mounting the DS2400 take into consideration these three ideal label position angles: Pitch 0°, Skew 10° to 30° and Tilt 0° .
Follow the suggestions for the best orientation:
Installation - 2.17