Connections
Connecting to Your Receiver/Amplifier
1.Using one of the supplied audio cables, connect the cassette deck’s L and R LINE OUTPUT jacks to the receiver/amplifier’s left and right tape input jacks.
2.Using the other audio cable, connect the cassette deck’s LINE INPUT jacks to the receiver/amplifier’s tape output jacks.
Note: If you are not sure which receiver/amplifier jacks to use, refer to your receiver/amplifier’s owner’s manual.
Connecting the Remote Control Cable
If you have an Optimus receiver/amplifier that has a remote control jack (labeled CONTROL IN/OUT), you can use the receiver/amplifier’s remote control to operate the cassette deck.
Connect the receiver/amplifier’s CONTROL OUT jack to the cassette deck’s CONTROL IN jack using the supplied remote control cable.
If you have another Optimus audio component that has a remote con- trol jack, connect the cassette deck’s CONTROL OUT jack to the compo- nent’s CONTROL IN jack. This relays the remote control signal from the receiver/amplifier to the other component.
Note: You must also connect audio cables to your receiver for the receiver’s remote control to operate your cassette deck.
Connecting the CD-Deck Synchro Control Cable
If you have an Optimus CD player that has a
Connecting Power
Carefully check all connections. Then plug the AC power cord into a standard AC outlet. The power cord’s plug is polarized and fits only one way. The cassette deck automatically turns on.
Warning: To prevent electric shock, do not plug the power cord into an extension cord or other receptacle unless you can fully and easily insert the plug’s blades.
5