IBM 4682/92 Port E Interface Selection
Scan this label to enable the IBM 468x/9x Port E interface.
IBM 4682/92 Port E Settings
Data Format: Send As Code 39 — converts bar code data (UPC/EAN,
These settings are for IBM 4682/92 Port E interface ONLY.
Limit Command Set — is an option that causes the scanner to ignore 'enable scanner' and 'disable scanner' commands sent from the host.
Transmit Unsolicited Status1 — when enabled, this option causes the scanner to transmit a status message to the host upon receipt of an "SNRM".
SET
DATA FORMAT
SEND AS CODE 39 ----------------
DON'T SEND AS CODE 39
ENABLE LIMIT COMMAND SET
DISABLE LIMIT COMMAND SET
TRANSMIT UNSOLICITED STATUS
DON'T TRANSMIT UNSOLICITED STATUS
END ----------------------------------------------
1 For this IBM interface, the setting for Unsolicited Status is normally Disabled.
Programming Guide | 11 |