Datalogic Scanning GM4100 manual Do not replace the battery pack when the device is turned on

Page 13

Setting Up the Reader

Always charge the battery at 32° – 104°F (0° - 40°C) tem- perature range.

Use only the authorized power supplies, battery pack, chargers, and docks supplied by your Datalogic reseller.

CAUTION The use of any other power supplies can damage the device and void your warranty.

Do not disassemble or modify the battery. The battery contains safety and protection devices, which, if dam- aged, may cause the battery to generate heat, explode or ignite.

Do not place the battery in or near fire, on stoves or other high temperature locations.

Do not place the battery in direct sunlight, or use or store the battery inside cars in hot weather. Doing so may cause the battery to generate heat, explode or ignite. Using the battery in this manner may also result in a loss of performance and a shortened life expec- tancy.

Do not place the battery in microwave ovens, high-pres- sure containers or on induction cookware. Immediately discontinue use of the battery if, while using, charging or storing the battery, the battery emits an unusual smell, feels hot, changes color or shape, or appears abnormal in any other way.

Do not replace the battery pack when the device is turned on.

Do not remove or damage the battery pack’s label.

Do not use the battery pack if it is damaged in any part. Battery pack usage by children should be supervised.

As with other types of batteries, Lithium-Ion (LI) batteries will lose capacity over time. Capacity deterioration is noticeable after one year of service whether the battery is in use or not. It is difficult to precisely predict the finite life of a LI battery, but cell manufacturers rate them at 500 charge cycles. In other words, the batteries should be expected to take 500 full dis- charge / charge cycles before needing replacement. This number is higher if partial discharging / recharging is adhered to rather than full / deep dis- charging,

The typical manufacturer advertised useful life of LI batteries is one to three years, depending on usage and number of charges, etc., after which they should be removed from service, especially in mission critical applications. Do not continue to use a battery that is showing excessive loss of capacity, it should be properly recycled / disposed of and replaced. For most applications, batteries should be replaced after one year of service to maintain customer satisfaction and minimize safety concerns.

Collect and recycle waste batteries separately from the device in comply with European Directive 2006/66/EC, 2002/95/EC, 2002/96/EC and subsequent modifications, US and China regulatory and others laws and regulations about the environment.

Quick Reference Guide

9

Image 13
Contents Gryphon I GM4100 Datalogic Scanning, Inc Table of Contents Page FCC Class B Compliance Statement Statement of Agency ComplianceCanadian Notice Gryphon Product Series END User License Agreement Intellectual Property Limitation Of Liability Customers Under Software Support Software Product PolicyBattery Safety Setting Up the ReaderSerious injury Do not replace the battery pack when the device is turned on Connector Install the BatteriesInsert the cover in the handle and screw it back into place Changing the Base Station Position Configuring the Base StationTab Securing the DC Power Cord Optional Connecting the Base StationOptions for routing the DC cord Connecting to the Host RF Devices System and Network LayoutsStand Alone Layouts Multiple Reader Layout Base LEDs Using the BC40xx Radio BaseProgramming Using the Programming BarcodesDisplay Select the Interface Type Configure Other SettingsInterface Selection Configuring the InterfaceIBM Keyboard Keyboard Wand Emulation Standard Factory Settings Country ModeKeyboard Interface Scancode TablesCountry Mode Country Mode Country Mode Country Mode Caps Lock State Numlock Description Technical Specifications15% minimum reflectance Regulatory LED Beeper LED and Beeper IndicationsReader Number Error CodesIndication Leds Base Station IndicationsErgonomic Recommendations Power SupplyRegulatory Information Imager Labeling Weee Statement Exclusions WarrantyWarranty Quick Reference Guide Warranty Declaration of Conformity Italy