Freedom9 KVM-08P user manual Daisy Chain Your Switch

Page 12

Chapter 2: Hardware Installation

Daisy Chain Your Switch

If you have more than one Switch you may wish to Daisy Chain them together to allow them to be controlled like one larger switch

Step 1. Please use the 3 ft (91.44cm), 3 to 3 KVM cable to daisy chain the KVM, first.

Step 2. Use one end of 3 to 3 cable to connect the daisy chain port of bank 1 and the other end for the console port (white color block) of bank 2 KVM switch.

Step 3. Repeat step 2 to daisy chain as many banks as you want. The maximum number of banks you can daisy chain is eight(8).

Master (Bank 1)

8-Port KVM Switch

Slave (Bank 2)

Slave (Bank 3)

Slave (Bank 4)

Slave (Bank 8)

9

Image 12

Contents Port Stackable Keyboard Video Mouse Switch USER’S ManualFreedom9 Inc. 1 Year Limited Warranty Table of Contents Introduction Before you startQty Remark Features Specifications General Installation Product Details Front ViewRear View Push button function InstructionHardware Installation Rack InstallationConnecting Computers Connecting VGA of ConsoleConnecting Keyboard & Mouse of Console Connecting VGA of ComputerConnecting Keyboard and Mouse Connecting Other ComputersConnecting KVM Power Check AgainDaisy Chain Your Switch Password Protection Console OperationHot Plug Function ExampleSelecting Computer Using Push Button Reset ButtonSelecting Computer Using Hot Key Below are the hot key commands listSelecting Computer through Hot Key Example Sun symbol indicates a powered on status for the KVM port OSD Operation DetailsUse up arrow key or down arrow key to select KVM port Use PgUp or PgDn key for selecting previous or next Bank NoConsole Operation Troubleshooting When cascading the Master unit does not see the slave unitsPS/2 Mouse Problems Mouse is not detected during boot-up Computer boots up fine, but the mouse does not workWheel on the Mouse does not work on my computer. Why? Troubleshooting Certifications CE CertificatePage Freedom9 Inc