Freedom9 KVM-08P user manual Push button function, Instruction

Page 8

Chapter 2: Installation

Push button function

Port Status

Port Select

Bank Select Bank No.	Port No.	Port Select
	Reset

Bank Select

Power On/Off

Bank Status

Pressing the button cyclically through all the ports.

1			2		3		4		5	6		7		8

Instruction:

You can press the button in order as shown in the diagram above. If you switch to a port without computer connection or connected computer is powered-off, the “Port No.” LED will flash. If you switch to a valid computer connection, the “Port No.” LED will be steady on.

5

Image 8

Contents Port Stackable Keyboard Video Mouse Switch USER’S ManualFreedom9 Inc. 1 Year Limited Warranty Table of Contents Qty Remark IntroductionBefore you start Features Specifications General Rear View InstallationProduct Details Front View Push button function InstructionHardware Installation Rack InstallationConnecting Computers Connecting VGA of ConsoleConnecting Keyboard & Mouse of Console Connecting VGA of ComputerConnecting Keyboard and Mouse Connecting Other ComputersConnecting KVM Power Check AgainDaisy Chain Your Switch Password Protection Console OperationHot Plug Function ExampleSelecting Computer Using Push Button Reset ButtonSelecting Computer Using Hot Key Below are the hot key commands listSelecting Computer through Hot Key Example Sun symbol indicates a powered on status for the KVM port OSD Operation DetailsUse up arrow key or down arrow key to select KVM port Use PgUp or PgDn key for selecting previous or next Bank NoConsole Operation Troubleshooting When cascading the Master unit does not see the slave unitsWheel on the Mouse does not work on my computer. Why? PS/2 Mouse Problems Mouse is not detected during boot-upComputer boots up fine, but the mouse does not work Troubleshooting Certifications CE CertificatePage Freedom9 Inc