Freedom9 KVM-08P user manual Selecting Computer Using Hot Key, Below are the hot key commands list

Chapter 3: Console Operation

Selecting Computer Using Hot Key

You can conveniently command your KVM SWITCH by keyboard hot key entry. To send com- mands to the KVM SWITCH, the “SCROLL LOCK” key must be pressed twice within 2 seconds, then you will hear a confirmation beep that the keyboard is in hot key mode. If you have not pressed any additional key in hot key mode within 2 seconds, the keyboard will return back to the normal Operation System control state.

Below are the hot key commands list:

	This Combination					Does This
Scroll Lock		Scroll Lock			=	Previous Channel
						Next Channel
Scroll Lock		Scroll Lock			=	(Note: You could also press “up arrow key”
						or “down arrow key” to speed up selection
						of the destination port)
Scroll Lock		Scroll Lock	Page Up		=	Previous Bank
Scroll Lock		Scroll Lock	Page Down		=	Next Bank
Scroll Lock		Scroll Lock	Bank No +		=	Computer Selection
			Port No
Scroll Lock		Scroll Lock		B	=	Beeper
						(Note: The default Beeper function is ON)
Scroll Lock		Scroll Lock		S	=	Auto Scan
						OSD default value
Scroll Lock		Scroll Lock		R	=	(Note: 1. Rom re-flash command takes
						2~3 minutes. 2.Not including password)
						Search the same computer name
Scroll Lock		Scroll Lock		F	=	(Note: Search computer name starts from
						1st computer port)
Scroll Lock		Scroll Lock	Space bar		=	On Screen Display Menu
NOTE:

1.If you enable the scan mode command, the KVM switch will issue one Beep for confirma- tion each time one of the KVM ports hop to the next KVM port.

2.To get out of Auto Scan Mode, press any key or Space bar.

3.If you are trying to access a single digit port no. precede the port no. with a zero (0). Example: To access bank 3 and port 2, press “SCROLL LOCK” twice followed by the “302” value.

12