Freedom9 KVM-08P user manual Selecting Computer Using Push Button, Reset Button

Chapter 3: Console Operation

Selecting Computer Using Push Button

Current Active Bank Display Port Status

Bank Select Bank No.	Port No.	Port Select
	Reset

Bank Select Port Select

Reset Button:

Press Port Select and Bank Select of bank 1 (master) simultaneously to reset KVM switch. This reset action will not only return KVM switch back to initial state but it will also re-check any slave banks which are connected to the master KVM switch.

If you add a new KVM SWITCH as a slave bank, please use reset button of master KVM switch to assign a new ID to the slave. You can view the new slave bank by using the OSD menu after the reset.

Example:

To access a computer attached to Port 3 of the first Bank. First, you can push Bank Select once, and the Bank No will display current Active (1) Bank. Then you can push Port Select three times and the Port No will display Port Status (3) Port.

11