Boulder Amplifiers 865 manual Balance

Page 19

BALANCE

To change the level balance, press the BALANCE pushbutton. “BALANCE CENTERED” will show in the display. Now, rotating the control will change the balance instead of the volume for as long as “BALANCE...” is displayed.

Turning the control counterclockwise (left) will cause an indication such as “BALANCE R -2.0dB < “ in the display. This means that the right channel has been attenuated -2.0 dB below the left channel, regardless of volume setting, making the left channel louder.

The range of balance offset is limited to -20.0 dB. If the control is then rotated further counterclockwise, the “BALANCE RIGHT MUTED<” will be displayed to indicate that only the left channel is on.

2-4

OPERATION

Image 19
Contents Page Boulder Integrated Amplifier Page Table of Contents Remote Control Recording Introduction Getting StartedQuick Start Placement of the 865 Integrated Amplifier Connecting to the Mains Outlet Polarity Connecting a Balanced Analog SourceConnecting AN Unbalanced Source Connecting the Auxiliary Outputs Getting Started Connecting Your Loudspeakers Setting the Boulderlink Switch Operation Powering UPInput Selections Volume Balance Mute Display Batteries Remote ControlSource Selection VOLUME, Balance and MuteInput Names ProgrammingProgramming Input Level Calibration Input Balance Calibration Start Volume Theater ModeProgramming by the Display Button Auxiliary Outputs ModeRemote ID Boulderlink IDBoulderlink Speed Reset to Factory Defaults Boulderlink Connecting BoulderlinkBoulder Link Setting Boulderlink ID Numbers Setting Boulderlink SwitchesPower UP VIA Boulderlink Boulder Link Boulderlink Messages Boulder Link Recording Connecting a Recording DeviceAppendix Boulder 865 Integrated Amplifier Specifications Troubleshooting Symptom Cause Remedy Appendix