Boulder Amplifiers 865 manual Boulderlink ID, Remote ID, Boulderlink Speed

BOULDERLINK ID

Pressing the DISPLAY pushbutton again will make “PROGRAM BOULDER LINK, BOULDER LINK ID 0” show in the display. Rotating the volume control changes the ID number. For more information consult the Boulderlink section.

Unless you are using two or more 865 Integrated Amplifiers together, this setting should be left at “0.”

REMOTE ID

Pressing the DISPLAY pushbutton again will make “PROGRAM REMOTE ID, REMOTE CONTROL ID 5” show in the display. Rotating the volume control changes the ID number. This feature is used in conjunction with a wiring change in the remote control and should always be left set at “5.” Consult your dealer to change this setting.

BOULDERLINK SPEED

Pressing the DISPLAY pushbutton again will make ”BOULDERLINK SPEED, 62500 BAUD-Standard” show in the display. Rotating the volume control changes the baud rate. This feature increases the 1012’s compatibility with other brands of equipment. Consult your dealer before changing this setting.

4-7

PROGRAMMING