Getting Started, Introduction, Quick Start

GETTING STARTED

INTRODUCTION

Congratulations on your selection of the Boulder 865 Integrated Amplifier, the finest integrated amplifier in the world. We at Boulder are certain it will provide years of listening pleasure.

QUICK START

To get started listening, you will need to connect the 865 as both an amplifier and preamplifier. Please take note of the following.

WARNING: Because the volume control is connected optically, it has no stops and it is tempting to spin it. DO THIS ONLY WITH THE POWER OFF! It must be given the respect you would any other volume control, as it has the ability to get loud very quickly. By the time you have turned it up to -40.0 dB with a source turned on, you should be hearing some music. If not, do not increase the volume until you have solved this problem. See the troubleshooting section on page 7-3.

For the 865 to work properly, the Boulderlink MASTER/SLAVE switch should be set to MASTER in most instances. See page 1-9.

A thorough reading of this manual prior to use and set up will greatly enhance your enjoyment of the 865 Integrated Amplifier.

1-1

GETTING

STARTED