Displaying Information About CDs
The elapsed time of the current track (in minutes and seconds) automatical- ly appears on the CD display as a CD plays. To display additional informa- tion about the current CD, repeatedly press TIME MODE on the system or TIME on the remote control. As you press TIME MODE or TIME, information appears in the following order:
•Elapsed time of the entire CD (in minutes and seconds)
•Remaining time for the current track (in minutes and seconds)
•Remaining time for the entire CD (in minutes and seconds)
Note: The elapsed time since the first track started and the elapsed time since the CD started might not be the same. This is normal.
Skip Play
To skip backward or forward to a track (while a CD is playing or paused), repeatedly press SKIP/
SEARCH 
or 
on
the system or 
or 
on the re- mote control until the desired track number appears. The CD changer skips to the selected track, then plays it.
To skip to a track on another CD (while a CD is playing or paused), re- peatedly press DISC SELECTOR 
or
22
to select the CD’s number, then re-
peatedly press SKIP/SEARCH
or 
on the sys-
tem or 
or 
on the remote control until the desired track number appears. The CD changer skips to the selected track on the selected CD, then plays it.
Note: If you use skip play while a CD is paused, the CD remains paused when the CD changer skips to the se- lected track.
Audible Search
To search for a particular section of a track (while a CD is playing or paused), press and hold down SKIP/
SEARCH 
or 
on the system. The CD changer rapidly plays the CD either backward or for- ward (like reviewing or cueing a cas- sette tape) and automatically re- duces the CD’s volume if the CD was playing. When you hear the de- sired section, release SKIP/SEARCH
or 
on the sys-
tem to resume normal play.
Notes:
•You cannot use 
or 
on the remote control to do audible search.
•If you use audible search while a CD is paused, it remains
paused when you release SKIP/
SEARCH |
| or |
|
on the system.