USING THE CASSETTE DECK
The system has two cassette decks. You can play tapes in TAPE 1, and you can use TAPE 2 (RECORD/ PLAY) to play or record tapes.
Note: To control a tape, use the con- trol buttons under the deck where you loaded it.
(illus)
3.Press STOP/EJECT. The cassette compartment door opens.
LOADING AND PLAYING A CASSETTE TAPE
Note: Before playing or recording any cassette tape, take up any slack in the tape by turning the cassette’s hub with a pencil. If you do not remove excess slack, the tape could become tangled in the record/playback mechanism.
(illus show tape with pencil thru hub)
Follow these steps to load and play a cassette tape in either deck.
1.If necessary, press POWER to turn on the system.
2.Press TAPE to select the tape function. TAPE appears on the system display.
(illus)
4.Insert the cassette tape into the door’s guides with its open edge facing down, the side you want to play facing you, and its full reel to the left.
(illus)
5.Gently close the cassette com- partment door.
6.Press PLAY. The tape plays until it reaches the end of the side, then it automatically stops.
(illus)
31