Optimus 744 owner manual Programmed Play, Disc Scan, Programming and Playing a Sequence

13-1291.fm Page 25 Wednesday, July 14, 1999 6:29 PM

(Illus - show MUSIC SCAN key)

Notes:

•The play mode must be set to ALL DISC or 1 DISC to use music scan. See “Selecting and Playing a CD” on Page 20.

•If you press MUSIC SCAN or M.SCAN during normal play, music scan starts with the next track on the CD.

Disc Scan

Press DISC SCAN on the system to play the first 10 seconds of the first track on each loaded CD. The disc number flashes. Press DISC SCAN again to stop disc scan.

(illus)

Notes:

•The play mode must be set to ALL DISC or 1 DISC to use disc scan. See “Selecting and Playing a CD” on Page 20.

•If you press DISC SCAN during normal play, disc scan starts from the first track on the next CD.

PROGRAMMED PLAY

You can program up to 50 selections from all loaded CDs to play in any or- der you choose.

Note: You can store a selection more than once in a programmed se- quence.

Programming and Playing a Sequence

1.With play stopped, press PROG. on the remote control. DISC 0 and PROGRAM and 0P-01appear on the CD display.

(illus)

2.Use the number keys on the remote control to enter the disc number for the CD that has the tracks you want to program. Then, within 4 seconds, press DISC on the remote control.

Note: If the disc number you entered disappears before you press DISC, repeat this step.

3.Within 4 seconds, enter the first track number you want to pro- gram. Then, within 4 seconds, press TRACK on the remote con- trol.

25