Black & Decker 90521888, VPX3101 Operating Instructions, HOW the VPX Power Source Works

Page 9

90521888 VPX3101 1VPX Inverter 7/31/07

10:15 AM Page 9

LEAVING THE BATTERY IN THE CHARGER

The charger and battery pack can be left connected indefinitely with the LED illuminated. You may see the LED return to flashing (charging) state, as the charger will occasionally “top off “ the battery charge.

IMPORTANT CHARGING NOTES

1 . Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°C- 24°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

Note: The charger will not charge a battery pack if the pack temperature is below approximately 32°F (0°C) or above 122F (50°C). The battery pack should be left in the charger and the charger will begin to charge automatically when the cell temperature warms up or cools down.

2 . The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3 . If the battery pack does not charge properly:

a . Check current at receptacle by plugging in a lamp or other appliance.

b . Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c . Move charger and battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C).

d. If charging problems persist, take the tool, battery pack and charger to your local service center.

4 . The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5 . Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

6 . Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside charger.

CAUTION: Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

TO MAXIMIZE BATTERY LIFE:

1 . Remove the batteries from the charger after the charging is completed.

2 . Store the batteries at room temperature or below.

3 . Recharge discharged batteries within 1 week. Battery life will be greatly diminished if the battery sits too long after being discharged.

OPERATING INSTRUCTIONS

INSTALLING AND REMOVING THE BATTERY PACK (FIGURE D, E) Installing the battery pack:

Insert the metal terminal end of the battery pack into the VPX power source until you hear the lock snap into place and the VPXTM logo shows through the window as shown in figure D.

CAUTION: The battery can only be inserted in one direction. If the battery does not fit, remove and reverse the orientation. Do not force it.

Removing the battery pack:

Press the release button as shown in figure E and firmly pull the battery pack out of the VPX power source. Insert the battery pack into the charger (figure B) as described in the charger section of this manual.

HOW THE VPX POWER SOURCE WORKS

The VPX power source is an electronic device that converts low voltage DC (direct

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AVE this Manual for Future Reference Catalog Number VPX3101VEA EL Español EN LA Contraportada Read ALL Instructions General Safety Warnings and Instructions for ALL AppliancesImportant Safety Instructions for Your VPX Power Source Safety Guidelines Definitions90521888 VPX3101 1VPX Inverter 7/31/07 Features Controls IndicatorsIntroduction Important Safety Instructions for Battery Chargers Read ALL Instructions Important Safety Instruction for Battery PacksCharge Indicators Charging ProcedureStorage Recommendations Replace PackLeaving the Battery in the Charger HOW the VPX Power Source WorksTo Maximize Battery Life Operating InstructionsVPX Power Source Output Waveform Using the VPX Power SourceVolt AC Output Protective Features USB Power PortOperating Tips Volt AC OutletTroubleshooting Troubleshooting GuideRecommendations Accessories Common Power Output Problems USB OutletRvice Informat I O N Full TWO-YEAR Home USE Warranty Possible Cause RecommendationsSpecifications De catalogue VPX3101 N S E Rver CE Manuel Pour UN Usage ULT É R I E U R90521888 VPX3101 1VPX Inverter 7/31/07 Lignes Directrices EN Matière DE Sécurité Définitions Avertissement Pour Réduire LE Risque DE Blessures Conserver CES DirectivesIntroduction Caractéristiques Commandes ET IndicateursLire Toutes LES Directives Directives DE Sécurité Importantes Pour LES BLOCS-PILESProcédure DE Charge Recommandations EN Matière DE RangementVoyants DE Charge Remplacer le bloc-pilesBLOC-PILES Laissé Dans LE Chargeur FonctionnementRemarques Importantes Pour LE Chargement Pour Maximiser LA Durée DE VIE DE LA PileFonctionnement DU Bloc D’ALIMENTATION VPX Forme DE L’ONDE DE Sortie DU Bloc D’ALIMENTATION VPXRetirer le bloc-piles Utilisation DU Bloc D’ALIMENTATION VPX Sortie Alternative DE 115 VoltsPrise Secteur DE 120 Volts Port D’ALIMENTATION USBConseils D’UTILISATION Caractéristiques DE SécuritéT R E T I E N Dépannage RecommandationsGuide DE Dépannage Problèmes Audiovisuels CommunsProblèmes D’ALIMENTATION Communs Prise USB Cause Possible RecommandationsC E S S O I R E S Information SUR LES RéparationsFiche Technique Catálogo N VPX3101 N S E RVE Este Manual Para Futuras Consulta SLEA Todas LAS Instrucciones Pautas DE SEGURIDAD/DEFINICIONES Advertencia Para Reducir EL Riesgo DE Lesiones Conserve Estas InstruccionesCaracterísticas IntroducciónControles E Indicadores LEA Todas LAS Instrucciones Procedimiento DE Carga Recomendaciones CON Respecto AL AlmacenamientoIndicadores DE Carga Reemplazar el paqueteDejar EL Paquete DE Baterías EN EL Cargador Instrucciones DE OperaciónNotas Importantes Sobre LA Carga Para Maximizar LA Vida DE LA BateríaCómo Funciona LA Fuente DE Energía VPX Forma DE Onda DE Salida DE LA Fuente DE Energía VPXExtracción del paquete de baterías Cómo Utilizar LA Fuente DE Energía VPX Salida DE CA DE 115Precaución Para Reducir EL Riesgo Daño a LA Propiedad Puerto DE Energía USBSugerencias DE Operación Características DE ProtecciónN T E N I M I E N T O Guía Para Solucionar Problemas Detección DE ProblemasProblemas VISUALES/DE Audio Frecuentes RecomendacionesRecomendaciones Causa PosibleAccesorios Información DE MantenimientoEspecificaciones MEXICO, D.F CULIACAN, SINMERIDA, YUC MONTERREY, N.L90521888 VPX3101 1VPX Inverter 7/31/07 90521888 VPX3101 1VPX Inverter 7/31/07

90521888, VPX3101 specifications

The Black & Decker VPX3101,90521888 is a versatile and innovative power tool designed to meet the needs of both professional contractors and DIY enthusiasts. This powerful cordless tool offers a range of features and technologies that set it apart from the competition, making it an essential addition to any tool collection.

One of the standout features of the VPX3101 is its advanced lithium-ion battery technology. This battery provides consistent power, ensuring that users can complete their tasks without interruptions. The lightweight design of the VPX3101 makes it easy to handle, reducing user fatigue during extended use. With quick charging capabilities, the battery can be replenished with minimal downtime, allowing users to stay productive.

The VPX3101 is equipped with a high-performance motor that delivers exceptional torque and speed, making it suitable for a wide variety of applications. Whether you are drilling into tough materials or driving screws with precision, this tool provides the power you need to tackle any job. The variable speed control gives users the flexibility to adjust the tool’s performance to match the specific task at hand, enhancing accuracy and efficiency.

One of the key technologies incorporated in the VPX3101 is its ergonomic design. The handle is designed for maximum comfort and grip, ensuring that users can maintain control even in challenging conditions. Additionally, the tool is equipped with an integrated LED work light, illuminating the workspace and providing visibility in low-light conditions. This is particularly beneficial for tasks in cramped or dimly lit areas, enhancing safety and precision.

Another notable feature of the Black & Decker VPX3101 is its compact design, which allows for easy maneuverability in tight spaces. This makes it an excellent choice for tasks such as furniture assembly, cabinetry work, and other home improvement projects where space is limited. The tool also features a quick-release chuck, allowing for fast and easy bit changes, which helps to streamline workflow.

Durability is a defining characteristic of the VPX3101. Constructed with high-quality materials, this tool is designed to withstand the rigors of daily use. Whether used on a job site or at home, users can trust that the VPX3101 will deliver reliable performance over time.

In summary, the Black & Decker VPX3101,90521888 is a powerful, user-friendly cordless tool that combines advanced technology with practical features. Its ergonomic design, exceptional battery life, and high-performance capabilities make it a top choice for both professionals and DIYers looking to tackle a variety of tasks with confidence and ease.
Top Page Image Contents