Avaya M-ACCF/SF manual Switch Command Line Interface CLI, Commands Summary Table

Page 67

Chapter 4 X-Switch CLI & ATM Terminal Interface

X-Switch Command Line Interface (CLI)

This is the Command Line Interface (CLI) used with the ATM module. Most parameters are set using the Terminal Interace (see ATM Access Module Terminal Interface for Configuring ATM Parameters58).

To begin using the ATM access module you must first assign an IP address and ATM capabilities to the module via the CLI (see ATM IP Configuration46).

You can either connect a VT-100 terminal or PC with VT-100 emulation to the Console port of the M-SPX/S Supervisor module or Telnet the M-SPX/S Switch IP address.

Following is a list of commands available using this CLI:

Commands Summary Table
Following is a table of the		show commands:
1.	Reset the	Enables you to perform a module reset	Page 52
	Module
2.	Software	Enables you to download new software	Page 53
	Download	to the X-Switch entity of the M-ACC
		module
3.	Set Primary	Enables you to select one of the two	Page 55
	Version	internal S/W versions as the Primary
4.	Set Factory	Resets the module back to its preset	Page 55
	Defaults	Factory Default settings
5.	Create Report	For use by Technical Support Personnel	Page 55
		only
6.	Clear Mac	Enables you to delete the MAC Address	Page 56
	Address Table	Table of the Avaya M770 switch domain
7.	Configuration	Enables you to copy the configuration	Page 56
	Copy	settings of another module to the M-ACC
8.	ATM IP	Enables you to set the default parameters	Page 56
	Configuration	of the ATM entity of the M-ACC module

To connect to the M-SPX/S Console port

1Use the serial cable supplied to attach the RJ-45 console connector to the Console port of the M-SPX/S Supervisor module and the DB-9 connector to the serial (COM) port on your PC/terminal.

2Ensure that the serial port settings on the PC are 9600 baud, 8 bits, 1 stop bit and no parity.

3If you connected a PC, run a VT-100 emulation session. (You can use the Windows® HyperTerminal.)

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide

51

Image 67

Contents ACCF/SF Module Page ATM Terminology IntroductionFinding Information in This Guide Conventions Page Contents Contents Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide Iii Contents Contents Page Port Submenu Display Results List of FiguresManagement Submenu ATM Submenu Snmp SubmenuList of Tables Page ATM Benefits ATM Access ModulesFeatures and Benefits OverviewLAN Emulation Lane version Avaya M770 Frame Switch DomainsATM Access Module Features Wire Rate Transmission on ATM portLAN Emulation Client LEC Network Layer Concepts LAN EmulationLAN Emulation Overview Emulated LAN ComponentsLAN Emulation Server LES LAN Emulation Configuration Server LecsBroadcast and Unknown Server BUS Control VCCs Emulated LAN ConnectionsData VCCs Flush Protocol Frame OrderingOperation of the LAN Emulation Connecting a LEC to an ElanRegistration Connection Processes of the LEC to Lane ServerConnection Management Address ResolutionLAN Emulation Components in Your Network An Example LAN Emulation and Avaya DevicesMapping Ethernet and ATM Addresses Joining the ElanLEC must know the name of the Elan it is to join Locating the LecsIf the destination MAC address is listed in the ARP Table Address ResolutionWhat Happens to Unicast Frames? LAN Emulation Address Resolution Protocol LearpWhat Happens to Broadcast and Multicast Frames? Layered Network Architecture Network Layer Concepts ATM & ATM AdaptationATM Adaptation Layer AAL Asynchronous Transfer Mode ATM LayerATM Basics Service Processing ATM is Service Transparent10 Communication Channels ATM is Connection-OrientedVirtual Path Identifier VPI Virtual Channel Identifier VCI 11 Connection TerminologySwitched Virtual Circuits SVCs 12 Switching Cells Using VPI and VCI ValuesInterim Local Management Interface Ilmi ATM InterfacesNetworkhostidentifier ATM Address RegistrationATM Layer and Cell Structure 15 ATM Cell Structure Extending VLANs into the ATM Network Physical Layer16 Vlan to Elan Mapping 17 Extending VLANs into the ATM Network Putting Your ATM Network Together ApplicationsPlanning Your Network Does your network conform to the ATM configuration rules? ATM Configuration RulesWill you have sufficient Elan resources? What logical network domains, VLANs, do you wish to set up?Are the LAN Emulation services configured correctly? Extending VLANs Through the ATM NetworkATM Connections Within Your Network ATM Backbone in the Building Network Configuration ExamplesATM Backbone in the Building Avaya M770 Multitechnology Functionality Avaya M770 Multitechnology FunctionalityRouting in the X-Switch Domain Routing in the X-Switch DomainInstalling the M-ACC Module InstallationSafety Information Agency Approval Pre-installation ProcedureSingle-mode Module Laser Classification Multi-Mode Module LED WarningAvaya M770 Module DRU Budget Domain Usage ConsiderationsBudget Calculation Examples DRU Budget Information Window DRU Budget Information WindowInstalling the Module Inserting the Module into the Hub Connecting a Cable to the ATM PortCAM Contents Addressable Memory tests Power On Self TestRemoving an Existing ATM Access Module M-ACC LEDs Descriptions Post-Installation ChecksConnecting to the Serial Port Configuring the M-ACC ModuleACC Module Default Settings M-ACC Module Default SettingsFor example telnet Establishing a Telnet SessionTo connect to the M-SPX/S Console port Setting up the M-ACC ModuleATM IP Configuration Module Setup Main MenuAssigning the M-ACC module IP address, Gateway and Netmask Setting up the ATM Access Module There is no need to perform a reset. Configuration ExampleMLS Bridging Accmmls SwitchIntroduction Switch CLI & ATM Terminal InterfaceSwitch Command Line Interface CLI ACC ATM Access Module Terminal Menu InterfaceConventions Used Commands Summary Table Switch Command Line Interface CLIReset the Module Entering Software Download Parameters Software Download to the X-Switch CPUMonitoring the Software Download Process Starting the Software Download ProcessSet Primary Version Set Defaults to Factory SettingsCreate Report Clear Mac Address Table Configuration CopyAssigning the M-ACC module IP address, Gateway and Netmask Logging On Commands Tree ChartLogging Off Managing the ATM Access ModuleSubmenus Menu Structure of the ATM Access Module Main Menu Options Configuring System ParametersSystem Menu Initialize Submenu 1,2 Passwords Submenu 1,3Reset Submenu1,4 Display Submenu 1,1Display Flash Log Messages Submenu 1,5,1 System Logger Submenu 1,5Operational Meanings of Display Flash Log Submenu Items Operational Meanings of Display Memory Submenu Items Display Memory Log Messages Submenu 1,5,2ATM access module Configuration Configuring an ATM PortSystem Software Download Submenu 1,6 Operational Meanings of Port Submenu Items Port Submenu 2,1VCC Submenu 2,2 ATM Port Physical Submenu 2,1,6Aging Submenu 2,2,4 VCC Submenu Items and their Operational MeaningsSnmp Configuration Submenu 3,2 Administering IP and Snmp ManagementIP Submenu 3,1 Configure Submenu Items and their Operational Meanings 18 updSysAtt Submenu 3,2,6 20 Virtual net Submenu VN Configuration MenuLEC ATM VlanVlan Elan ID ElanLES ATM LECDownloading Setting up an ATM VLAN/ELANUpgrading Software PreliminariesATM Port Statistics Monitoring the ATM Access ModulePort Statistics Display Items and their Meanings 22 ATM Port Statistics ScreenStatistics Display Items and their Meanings VCC StatisticsCajunView M770 Device Manager version Network Management and MonitoringCajun LANEMaster version Running M770 Manager from HP Windows NT CajunView M770 Device ManagerStarting the M770 Manager Running M770 Manager from HP-OV for WindowsOverview LANEMasterStarting Cajun LANEMaster Overview Cajun LANEMaster ViewsCajun LANEMaster Window Page ATM Cable Specification SpecificationsACC ATM Access Module Technical Specifications Environmental, Safety, and EMC SpecificationsSDH Standard Supported Table A.3 Standard Multi-mode Cable SpecificationsOptical Standard Supported ATM ForumEIA-492CAAA Table A.4 Standard Multi-mode Cable SpecificationsImportant Safety Information Safety InformationTable B.1 Troubleshooting Tips TroubleshootingELAN/VLAN Page SAR IndexNumerics ATM WANText ATM VLAN/ELAN LearpLuni LESVCC United States How to Contact UsEmea Europe, Middle East and Africa Region UAE AP Asia Pacific Region Avaya.com