Avaya M-ACCF/SF manual Set Primary Version, Set Defaults to Factory Settings, Create Report

Chapter 4 X-Switch CLI & ATM Terminal Interface

Set Primary Version

The M-ACC stores two software versions. The version which is currently running is called the Primary version. A pointer (asterisk - *) shows which version is currently the primary one.

To set a different primary version, select option 4 from the Setup Main Menu. A menu similar to the following displays:

Primary Version Screen
M-ACCF	S/W Version: 4.2.2	Slot #: 5
<CR>	Refresh the screen

0.Return to Previous Menu

1.Save the Session

-----------------------------------

Select the Primary version

(The current primary is marked by *)

2.Version 1.0.3

3.* Version 1.0.1

>>>Enter your choice:

Once you select and save the desired primary version, you are prompted to reboot the M-ACC. Type y and the M-ACC will set the pointer accordingly, and reboot from the newly-defined primary version. If you don't wish to reboot at this time, the pointer is saved, but the M-ACC continues running from the old version.

Set Defaults to Factory Settings

You can set the M-ACC’s configuration back to its default factory settings by selecting item number 3 in the Module Setup Main Menu. The following confirmation and warning messages are displayed:

*** Set default values ***, Confirm [y/n]?y

***WARNING*** - Management parameters were changed. Reset the agent!!

Before exiting this session, select the option Reset the M-ACC from the Module Setup Main Menu.

Create Report

This command is intended for use by Avaya Technical Support personnel and provides a comprehensive report of the status the M-ACC module of each port.

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide 55