Avaya 3500YL, 2600, 5400ZL manual Configure Closet-A ProCurve 2626-24-PWR Switch

6.Create and configure the data VLAN that will run in Lab-A.

•Assign a VLAN ID for the data VLAN.

•Assign a name for the data VLAN.

•Assign an IP address for the data VLAN.

•Set an IP helper address for DHCP.

•Assign ports to the data VLAN.

ProCurve Switch 3500yl-24G-PWR# configure ProCurve Switch 3500yl-24G-PWR(config)# vlan 30

ProCurve Switch 3500yl-24G-PWR (vlan-30)#vlan 30 name Datavlan2 ProCurve Switch 3500yl-24G-PWR (vlan-30)#ip address 192.168.30.254/24 ProCurve Switch 3500yl-24G-PWR (vlan-30)# ip helper-address 10.20.20.250 ProCurve Switch 3500yl-24G-PWR (vlan-30)# untagged 3-4,13

ProCurve Switch 3500yl-24G-PWR (vlan-30)# exit

7. Save the running configuration to the startup configuration.

ProCurve Switch 3500yl-24G-PWR# configure

ProCurve Switch 3500yl-24G-PWR(config)# write memory

7. Configure Closet-A ProCurve 2626-24-PWR Switch

This section addresses configuring the Closet-A ProCurve 2626-24-PWR Switch. The ProCurve 2626-24-PWR Switch was used as an edge switch to supply PoE power, support VLANs and to enforce QoS policies.

To configure the ProCurve 2626-24-PWR Switch, connect a PC or laptop to the serial port of the

2626-24-PWR. Run a terminal emulation program with the following configuration:

ƒBits per second: 9600

ƒData bits: 8

ƒParity: None

ƒStop bits: 1

ƒFlow Control: None

TMA; Reviewed:	Solution & Interoperability Test Lab Application Notes	14 of 21
SPOC 7/21/2008	©2008 Avaya Inc. All Rights Reserved.	ProCurve-ACM