Avaya 2600, 5400ZL, 3500YL manual

Page 9

5.Create and configure the telephony VLAN where all of the Avaya telephony equipment will run.

Assign a VLAN ID for the telephony VLAN.

Assign a name for the telephony VLAN.

Assign an IP address for the telephony VLAN.

Assign ports to the telephony VLAN.

Assign a QoS priority to the telephony VLAN.

Note: The commands identified with an “*” below are required when connecting an Avaya G700 Media Gateway to a ProCurve 5406zl Switch with J8177C Transceiver. Auto negotiation for the associated port must be set to auto-100. The Avaya G700 Media Gateway is auto-100 by default and requires no change. The port on the ProCurve 5406zl Switch (port a21 in this example) is a GigE port and needs to be changed from the default of auto-1000 to auto-100.

ProCurve Switch 5406zl# configure

ProCurve Switch 5406zl(config)# vlan 10

ProCurve Switch 5406zl (vlan-10)#vlan 10 name vlan10

ProCurve Switch 5406zl (vlan-10)#ip address 10.1.1.254/24

ProCurve Switch 5406zl (vlan-10)# untagged a4,a10,a21

ProCurve Switch 5406zl (vlan-10)# qos priority 6

ProCurve Switch 5406zl (vlan-10)# exit

*ProCurve Switch 5406zl# configure

*ProCurve Switch 5406zl(config)# interface a21

*ProCurve Switch 5406zl(eth-A21)# speed-duplexauto-100

6.Create and configure the voice VLAN that will run between the control room and closets.

Assign a VLAN ID for the voice VLAN.

Assign a name for the voice VLAN.

Assign voice option.

Assign an IP address for the voice VLAN.

Set an IP helper address for DHCP.

Assign ports to the voice VLAN.

ProCurve Switch 5406zl# configure

ProCurve Switch 5406zl(config)# vlan 33

ProCurve Switch 5406zl (vlan-33)#vlan 33 name Voice1

ProCurve Switch 5406zl (vlan-33)# voice

ProCurve Switch 5406zl (vlan-33)#ip address 10.33.1.254/24

ProCurve Switch 5406zl (vlan-33)# ip helper-address 10.20.20.250

ProCurve Switch 5406zl (vlan-33)# tagged a11-a12,trk1

ProCurve Switch 5406zl (vlan-33)# exit

TMA; Reviewed:

Solution & Interoperability Test Lab Application Notes

9 of 21

SPOC 7/21/2008

©2008 Avaya Inc. All Rights Reserved.

ProCurve-ACM

Image 9
Contents Abstract ProCurve Switch 5400zl/3500yl Series Switch Hardware ConfigurationProCurve Switch 2600 Series Switch IntroductionLab-A Control RoomCloset-A Closet-BNetwork Configuration Configure Avaya Communication Manager Configure QoS on Avaya Communication ManagerEquipment and Software Validated Media Parameters Configure the ProCurve 5406zl SwitchPage Page Page Page Configure Lab-A ProCurve 3500yl-24G-PWR Switch ProCurve Switch 3500yl-24G-PWRconfig# boot Page Configure Closet-A ProCurve 2626-24-PWR Switch ProCurve Switch 2626-PWR#qos dscp-map 101110 priority Configure Closet-B ProCurve 2610-24-PWR Switch ProCurve Switch 2610-24-PWR# spanning-tree General Test Approach Interoperability Compliance TestingVerification Steps ConclusionTest Results Additional References Avaya Inc. All Rights Reserved