Avaya 3500YL, 2600, 5400ZL Equipment and Software Validated, Configure Avaya Communication Manager

Page 5

3. Equipment and Software Validated

The following equipment and software/firmware were used for the sample configuration provided:

Equipment

 

Software/Firmware

Avaya S8300 Server

Avaya Communication Manager

5.0

- R015x.00.0.825.4

 

Avaya G700 Media Gateway

 

 

MGP

26.31.0

MM712 DCP Media Module

HW05 / FW08

Avaya SIP Enabled Services (SES)

5.0

- SES-5.0.0.0-825.31

Avaya Modular Messaging - Messaging

3.1

 

Application Server (MAS)

 

 

 

Avaya Modular Messaging - Message Storage

3.1

 

Server (MSS)

 

 

 

Avaya IA 770 INTUITY AUDIX

5.0

 

Avaya 9600 Series IP Telephones

Avaya one-X Deskphone SIP

2.0.3 (SIP)

 

Avaya 9600 Series IP Telephones

Avaya one-X Deskphone Edition

2.0

(H.323)

 

Avaya 2410 Digital Telephone

5.0

 

ProCurve 5406zl by HP

FW-K.13.09

with J8705A module and RJ45 (J8177C

 

 

Transceiver)

 

 

ProCurve 3500yl-24-PWR by HP

FW-K.13.09

ProCurve 2610-24-PWR by HP

FW-H.11.07

ProCurve 2626-24-PWR by HP

FW-H.10.50

4. Configure Avaya Communication Manager

This section shows the steps used to configure Avaya Communication Manager. For detailed information on the installation, maintenance, and configuration of Avaya Communication Manager, refer to [1].

4.1.Configure QoS on Avaya Communication Manager

IP networks were originally designed to carry data on a best-effort delivery basis, which meant that all traffic had equal priority and an equal chance of being delivered in a timely manner. As a result, all traffic had an equal chance of being dropped when congestion occurred. To prioritize VoIP traffic, QoS is utilized and should be implemented throughout the entire network.

In order to achieve prioritization of VoIP traffic, the VoIP traffic must be classified. The Avaya S8300 Server, Avaya G700 Media Gateway, Avaya SIP Enablement Services and Avaya IP telephones support both Layer 2 802.1.p/Q priority and Layer 3 DiffServ.

TMA; Reviewed:

Solution & Interoperability Test Lab Application Notes

5 of 21

SPOC 7/21/2008

©2008 Avaya Inc. All Rights Reserved.

ProCurve-ACM

Image 5
Contents Abstract ProCurve Switch 5400zl/3500yl Series Switch Hardware ConfigurationProCurve Switch 2600 Series Switch IntroductionLab-A Control RoomCloset-A Closet-BNetwork Configuration Equipment and Software Validated Configure Avaya Communication ManagerConfigure QoS on Avaya Communication Manager Media Parameters Configure the ProCurve 5406zl SwitchPage Page Page Page Configure Lab-A ProCurve 3500yl-24G-PWR Switch ProCurve Switch 3500yl-24G-PWRconfig# boot Page Configure Closet-A ProCurve 2626-24-PWR Switch ProCurve Switch 2626-PWR#qos dscp-map 101110 priority Configure Closet-B ProCurve 2610-24-PWR Switch ProCurve Switch 2610-24-PWR# spanning-tree General Test Approach Interoperability Compliance TestingTest Results Verification StepsConclusion Additional References Avaya Inc. All Rights Reserved