Buffalo Technology WLI3-TX1-G54 guide

Conﬁguration with Ethernet Converter Manager

If you have a Windows 98SE/ME/2000/XP machine with a CD-ROM drive available on your computer network, it is recommended to use the Ethernet Converter Manager to conﬁgure the Ethernet Converter. The following steps will guide you through conﬁguring the Ethernet Con- verter via the Ethernet Converter Manager.

◗With the included network patch cable, plug the Ethernet Converter's LAN port into an open port on your network's router, or on on e of your network switches or hubs. If there are no ports available, you can temporarily remove a computer or other connected device and plug the Ethernet Converter to that port. You can plug the Ethernet Converter directly to the conﬁguring computer, but will have to use the manual conﬁguration found on 'Page 8' of this Manual.

◗Once the network cable has been plugged in, plug the Ethernet Converter's AC Adapter into an available power outlet. Then attach the power connector to the back of the Ethernet Converter. The boot up process takes 30 seconds and can be conﬁrmed completed when both the Wireless and Ethernet lights are green.

◗Return to the PC designated for conﬁguration and

insert the included Ethernet Converter CD-ROM into	the PC's CD-ROM
drive.
◗ The AirNavigator application should launch
automatically. If it does not, browse your CD-ROM
drive in Windows and run the launch.exe program.