Buffalo Technology WLI3-TX1-G54 specs

◗Conﬁguration Limitations - The conﬁguration limitations of the Ethernet Converter specify what types of clients can conﬁgure the Ethernet Converter through the Web Based Con- ﬁguration. Prohibiting conﬁguration from either wireless or wired clients can have negative effects on your ability to access the Web Based Conﬁguration. Please be certain of your setting changes. Prohibiting conﬁguration from wireless clients creates a rule that says any client that is connected to the Ethernet Converter wirelessly cannot access its Web Based Conﬁguration. Prohibiting conﬁguration from wired clients creates a rule that says any cli- ent that is hard wired into the Ethernet Converter's LAN port cannot access its Web Based Conﬁguration. Prohibiting both conﬁgurations makes all Web Based Conﬁguration attempts impossible. The Ethernet Converter must then be re-initialized to restore conﬁguration capa- bilities.

Initialization and Reboot - This page contains settings that restart and re-initialize the Ethernet Converter.

◗Initialize - Initializing the Ethernet Converter restores the Ethernet Converter's settings to the default settings. This will erase all conﬁguration changes made, and the setup will have to be restarted as if the product was brand new. This will erase any passwords as well. Re-initialization can also occur without

logging into the Ethernet Converter. Please see the troubleshooting section for that procedure.

◗Restart - Restarting the Ethernet Converter performs a simple restart similar to what would occur if the power was cycled on the Ethernet Converter. No settings are lost in this case. The restart process takes 30 seconds and can be conﬁrmed complete when the wireless light is green.