Avocent PS/2 IP user manual Initial Configuration, Initial configuration via Dhcp server

Page 18

8/16/32 PS/2 KVM over IP switch

4. Configuration

4.1 Initial Configuration

The PS/2 IP-KVM switch's communication interfaces are all based on TCP/IP. It comes pre-configured with the IP configuration listed in Table 4-1.

Parameter

Value

IP auto configuration

DHCP

IP-Address

-

Net-mask

255.255.255.0

Default-Gateway

none

Table 4-1. Initial network configuration

Warning

If the DHCP connection fails on boot up, the PS/2 IP-KVM switch will not have an IP address.

If this initial configuration does not meet your requirements, the following describes the initial IP configuration that is necessary to access the PS/2 IP-KVM switch for the first time.

4.1.1 Initial configuration via DHCP server

By default, the PS/2 IP-KVM switch will try to contact a DHCP server in the subnet to which it is physically connected. If a DHCP server is found, it may provide a valid IP address, gateway address and net mask. Before you connect the device to your local subnet, be sure to complete the corresponding configuration of your DHCP server. It is recommended to configure a fixed IP assignment to the MAC address of the PS/2 IP-KVM switch. You can find the MAC address labeled on the bottom side.

If this initial configuration does not meet your local requirements, use the setup tool to adjust the values to your needs. The setup tool can be found on the CD ROM delivered with this package. You can follow the procedure described below.

PS/2 IP-KVM switch Setup Tool

MAC Address Detection

Connect the PS/2 IP-KVM switch to your computer either via local network, or via USB. Start the setup tool from the CD ROM on the computer that the PS/2 IP-KVM switch is installed. Depending on the connection (USB or network), the device detection is different. A window opens as seen below:

18

Image 18
Contents PS/2 IP-KVM Switch USER’S Manual RevTable of Contents Menu Options Initial IP configuration Quick Installation GuideInstallation Video modesWeb interface Remote ConsoleDefault settings for all video modes or only the current one When the server is up and running When the sever is deadIntroduction Features Package contents Model No port PS/2 IP-KVM switch Technical specifications Model No Port PS/2 IP-KVM SwitchPort System requirement Model No Ports PS/2 IP-KVM switch Model No Ports PS/2 IP-KVM switchCable diagrams PS/2 Cable VGA Cable AT to PS/2 keyboard adapter OptionalPS/2 to DB9 adapter Optional 16/32 PS/2 KVM over IP switch Operation Overview Hardware installationConnecting PS/2 IP-KVM switch to the host system StepLocal console Optional InternetConnecting the External Reset/Power Option Initial configuration via Dhcp server ConfigurationInitial Configuration PS/2 IP-KVM switch Setup ToolAuthentication PS/2 IP-KVM switch setup toolKeyboard, Mouse and Video configuration Initial configuration via serial consoleIP autoconfiguration IP addressHost system mouse settings 3.1 PS/2 IP-KVM switch keyboard settingsRemote Mouse Settings Auto mouse speed and mouse synchronizationSpecial Mouse Driver Windows XP Mouse SettingsSingle and Double Mouse Mode Active DesktopUsage PrerequisitesTelnet Login into the PS/2 IP-KVM switch and logout Internet Explorer displaying the encryption key lengthNavigation MainLogout from the PS/2 IP-KVM switch Remote Console General descriptionMain Window Remote Console Control Bar16/32 PS/2 KVM over IP switch Exclusive Access Monitor OnlyScaling Mouse Handling Local CursorVideo Settings Remote Console Options MenuCursorReset all Modes PhaseReset this Mode BrightnessUndo Changes Soft KeyboardRemote Console Status Line 14. Remote Console Confirmation DialogRemote Control KVM Console Menu OptionsTelnet Console 16/32 PS/2 KVM over IP switch Change Password Users And GroupsKVM Settings User Console15. User Console Settings Part 16/32 PS/2 KVM over IP switch Power Control 16. Power Control17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings Video4Device Settings Network16/32 PS/2 KVM over IP switch Dynamic DNS 20. Dynamic DNS16/32 PS/2 KVM over IP switch Security 22. Device SecurityAnti Brute Force Setting Unblocking users Certificate24. SSL Certificate Upload Serial Port 25. Serial Port16/32 PS/2 KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event LogDevice Information Board SummaryReset Functions 32. Event Log ListUpdate Firmware 33. Update FirmwareUnit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS2 KVM over IP Key Codes Table B.1 Key Names Video Modes

PS/2 IP specifications

The Avocent PS/2 IP KVM (Keyboard, Video, Mouse) switch is a sophisticated solution designed to provide remote access and management capabilities for servers and devices located in data centers or remote locations. As IT environments grow increasingly complex, the need for seamless and efficient management tools becomes essential. The Avocent PS/2 IP addresses this need by integrating high-end features and technologies that streamline operation and enhance productivity.

One of the standout features of the Avocent PS/2 IP is its ability to facilitate secure, remote access to connected devices through an IP network. This enables administrators to control servers and troubleshoot issues from virtually anywhere, eliminating the need to be physically present in the server room. The system supports multiple simultaneous user sessions, allowing multiple administrators to connect and manage devices at the same time, which is crucial for teamwork in large IT environments.

In terms of security, the Avocent PS/2 IP employs robust authentication mechanisms, including user-level access control and encrypted remote sessions. This ensures that only authorized personnel can access sensitive systems, significantly reducing the risk of unauthorized access or data breaches.

The Avocent PS/2 IP is designed to support a wide range of operating systems and server hardware, making it an extremely versatile solution for diverse IT infrastructures. It is compatible with various PS/2 devices and incorporates advanced video quality technologies to deliver high-definition video output, ensuring that administrators receive a clear and accurate representation of the connected systems.

Additionally, the device features built-in monitoring and alerting capabilities. These functionalities allow IT teams to keep track of device status, receive notifications of potential issues, and proactively address problems before they escalate into major outages. The ease of integration with existing management software also enhances its effectiveness.

Another significant characteristic of the Avocent PS/2 IP is its scalability. Organizations can easily expand their KVM infrastructure as their needs grow, allowing for the addition of more servers or devices without requiring a complete system overhaul. This flexibility makes it a cost-effective choice for businesses aiming to future-proof their IT operations.

In conclusion, the Avocent PS/2 IP KVM switch combines advanced remote access capabilities, strong security features, and broad compatibility, making it an essential tool for efficient IT management in today’s fast-paced technological landscape. Its design focuses on enhancing productivity and minimizing downtime, proving beneficial for organizations seeking streamlined operations and superior control over their server environments.