Avocent PS/2 IP user manual 16/32 PS/2 KVM over IP switch

Page 37

8/16/32 PS/2 KVM over IP switch

Connecting to the PS/2 IP-KVM switch is done as usual and as required by the Telnet client, for instance in a UNIX shell:

telnet 192.168.1.22

Replace the IP address by the one that is actually assigned to the PS/2 IP-KVM switch. This will prompt for username and password in order to log into the device. The credentials that need to be entered for authentication are identical to those of the web interface. That means, the user management of the Telnet interface is entirely controlled with the according functions of the web interface.

Once you have successfully logged into the PS/2 IP-KVM switch a command line will be presented and you can enter according management commands.

In general, the Telnet interface supports two operation modes: the command line mode and the terminal mode. The command line mode is used to control or display some parameters. In terminal mode the pass-through access to serial port 1 is activated (if the serial settings were made accordingly). All inputs are redirected to the device on serial port 1 and its answers are displayed on the Telnet interface.

The following list shows the according command mode command syntax and their usage.

help

Displays the list of possible commands

cls

Clears the screen

logout

Exits the current session and disconnects from the client

version

Displays the release information

power [onoff [shortlong]]

The host is powered on or off. If no new power state is given, the current state will be displayed. The given attribute (either short or long) will determine the ATX duration. The default value is short.

reset [hostcard]

Resets the given target, the host system or the PS/2 IP-KVM switch card. If no reset target is given it defaults to “ host ” . Note that resetting the PS/2 IP-KVM switch results in disconnecting every client. This includes also the client the reset command was sent from.

terminal

Starts the terminal passthrough mode for serial port 1. The key sequence esc exit switches back to the command mode. The command has an optional parameter (1 or 2) to select the desired serial port for passthrough access.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Rev PS/2 IP-KVM Switch USER’S ManualTable of Contents Menu Options Installation Quick Installation GuideInitial IP configuration Video modesRemote Console Web interfaceDefault settings for all video modes or only the current one When the sever is dead When the server is up and runningIntroduction Features Package contents Model No port PS/2 IP-KVM switch Port PS/2 IP-KVM Switch Technical specifications Model NoPort Model No Ports PS/2 IP-KVM switch System requirement Model No Ports PS/2 IP-KVM switchCable diagrams PS/2 Cable AT to PS/2 keyboard adapter Optional VGA CablePS/2 to DB9 adapter Optional 16/32 PS/2 KVM over IP switch Connecting PS/2 IP-KVM switch to the host system Hardware installationOperation Overview StepLocal console Internet OptionalConnecting the External Reset/Power Option Initial Configuration ConfigurationInitial configuration via Dhcp server PS/2 IP-KVM switch Setup ToolPS/2 IP-KVM switch setup tool AuthenticationIP autoconfiguration Initial configuration via serial consoleKeyboard, Mouse and Video configuration IP addressRemote Mouse Settings 3.1 PS/2 IP-KVM switch keyboard settingsHost system mouse settings Auto mouse speed and mouse synchronizationSingle and Double Mouse Mode Windows XP Mouse SettingsSpecial Mouse Driver Active DesktopPrerequisites UsageTelnet Internet Explorer displaying the encryption key length Login into the PS/2 IP-KVM switch and logoutMain NavigationRemote Console General description Logout from the PS/2 IP-KVM switchRemote Console Control Bar Main Window16/32 PS/2 KVM over IP switch Monitor Only Exclusive AccessScaling Local Cursor Mouse HandlingRemote Console Options MenuCursor Video SettingsReset this Mode PhaseReset all Modes BrightnessSoft Keyboard Undo Changes14. Remote Console Confirmation Dialog Remote Console Status LineMenu Options Remote Control KVM ConsoleTelnet Console 16/32 PS/2 KVM over IP switch Users And Groups Change PasswordUser Console KVM Settings15. User Console Settings Part 16/32 PS/2 KVM over IP switch 16. Power Control Power ControlKeyboard/Mouse 17. Keyboard and Mouse SettingsVideo 18. Video SettingsNetwork 4Device Settings16/32 PS/2 KVM over IP switch 20. Dynamic DNS Dynamic DNS16/32 PS/2 KVM over IP switch 22. Device Security SecurityAnti Brute Force Setting Certificate Unblocking users24. SSL Certificate Upload 25. Serial Port Serial Port16/32 PS/2 KVM over IP switch 27. Date and Time Date And Time29. Event Log Event LogBoard Summary Device Information32. Event Log List Reset Functions33. Update Firmware Update Firmware34. Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Single port PS2 KVM over IP Key Codes Table B.1 Key Names Video Modes

PS/2 IP specifications

The Avocent PS/2 IP KVM (Keyboard, Video, Mouse) switch is a sophisticated solution designed to provide remote access and management capabilities for servers and devices located in data centers or remote locations. As IT environments grow increasingly complex, the need for seamless and efficient management tools becomes essential. The Avocent PS/2 IP addresses this need by integrating high-end features and technologies that streamline operation and enhance productivity.

One of the standout features of the Avocent PS/2 IP is its ability to facilitate secure, remote access to connected devices through an IP network. This enables administrators to control servers and troubleshoot issues from virtually anywhere, eliminating the need to be physically present in the server room. The system supports multiple simultaneous user sessions, allowing multiple administrators to connect and manage devices at the same time, which is crucial for teamwork in large IT environments.

In terms of security, the Avocent PS/2 IP employs robust authentication mechanisms, including user-level access control and encrypted remote sessions. This ensures that only authorized personnel can access sensitive systems, significantly reducing the risk of unauthorized access or data breaches.

The Avocent PS/2 IP is designed to support a wide range of operating systems and server hardware, making it an extremely versatile solution for diverse IT infrastructures. It is compatible with various PS/2 devices and incorporates advanced video quality technologies to deliver high-definition video output, ensuring that administrators receive a clear and accurate representation of the connected systems.

Additionally, the device features built-in monitoring and alerting capabilities. These functionalities allow IT teams to keep track of device status, receive notifications of potential issues, and proactively address problems before they escalate into major outages. The ease of integration with existing management software also enhances its effectiveness.

Another significant characteristic of the Avocent PS/2 IP is its scalability. Organizations can easily expand their KVM infrastructure as their needs grow, allowing for the addition of more servers or devices without requiring a complete system overhaul. This flexibility makes it a cost-effective choice for businesses aiming to future-proof their IT operations.

In conclusion, the Avocent PS/2 IP KVM switch combines advanced remote access capabilities, strong security features, and broad compatibility, making it an essential tool for efficient IT management in today’s fast-paced technological landscape. Its design focuses on enhancing productivity and minimizing downtime, proving beneficial for organizations seeking streamlined operations and superior control over their server environments.
Top Page Image Contents