Avocent PS/2 IP user manual 16/32 PS/2 KVM over IP switch

Page 48

8/16/32 PS/2 KVM over IP switch

The administrator has to register a PS/2 IP-KVM switch that is supposed to take part in the service with the Dynamic DNS Server and assign a certain hostname to it. He will get a nickname and a password in return to the registration process. This account information together with the hostname is needed in order to determine the IP address of the registered PS/2 IP-KVM switch.

You have to perform the following steps in order to enable Dynamic DNS:

Make sure that the LAN interface of the PS/2 IP-KVM switch is properly configured.

Enter the Dynamic DNS Settings configuration dialog as shown in Figure 6-20.

Enable Dynamic DNS and change the settings according to your needs (see below).

Enable Dynamic DNS

This enables the Dynamic DNS service. This requires a configured DNS server IP address.

Dynamic DNS server

This is the server name where PS/2 IP-KVM switch registers itself in regular intervals. Currently, this is a fixed setting since only dyndns.org is supported for now.

Hostname

This is the hostname of the PS/2 IP-KVM switch that is provided by the Dynamic DNS Server. (Use the whole name including the domain, e.g. testserver.dyndns.org, not just the actual hostname).

Username

You have registered this username during your manual registration with the Dynamic DNS Server. Spaces are not allowed in the Nickname.

Password

You have used this password during your manual registration with the Dynamic DNS

Server.

Check time

The PS/2 IP-KVM switch card registers itself in the Dynamic DNS server at this time.

Check interval

This is the interval for reporting again to the Dynamic DNS server by the PS/2 IP-KVM switch.

Warning

The PS/2 IP-KVM switch has its own independent real time clock. Make sure the time setting of the PS/2 IP-KVM switch is correct. (See the Section called Date And Time)

48

Image 48
Contents PS/2 IP-KVM Switch USER’S Manual RevTable of Contents Menu Options Quick Installation Guide InstallationInitial IP configuration Video modesWeb interface Remote ConsoleDefault settings for all video modes or only the current one When the server is up and running When the sever is deadIntroduction Features Package contents Model No port PS/2 IP-KVM switch Technical specifications Model No Port PS/2 IP-KVM SwitchPort System requirement Model No Ports PS/2 IP-KVM switch Model No Ports PS/2 IP-KVM switchCable diagrams PS/2 Cable VGA Cable AT to PS/2 keyboard adapter OptionalPS/2 to DB9 adapter Optional 16/32 PS/2 KVM over IP switch Hardware installation Connecting PS/2 IP-KVM switch to the host systemOperation Overview StepLocal console Optional InternetConnecting the External Reset/Power Option Configuration Initial ConfigurationInitial configuration via Dhcp server PS/2 IP-KVM switch Setup ToolAuthentication PS/2 IP-KVM switch setup toolInitial configuration via serial console IP autoconfigurationKeyboard, Mouse and Video configuration IP address3.1 PS/2 IP-KVM switch keyboard settings Remote Mouse SettingsHost system mouse settings Auto mouse speed and mouse synchronizationWindows XP Mouse Settings Single and Double Mouse ModeSpecial Mouse Driver Active DesktopUsage PrerequisitesTelnet Login into the PS/2 IP-KVM switch and logout Internet Explorer displaying the encryption key lengthNavigation MainLogout from the PS/2 IP-KVM switch Remote Console General descriptionMain Window Remote Console Control Bar16/32 PS/2 KVM over IP switch Exclusive Access Monitor OnlyScaling Mouse Handling Local CursorVideo Settings Remote Console Options MenuCursorPhase Reset this ModeReset all Modes BrightnessUndo Changes Soft KeyboardRemote Console Status Line 14. Remote Console Confirmation DialogRemote Control KVM Console Menu OptionsTelnet Console 16/32 PS/2 KVM over IP switch Change Password Users And GroupsKVM Settings User Console15. User Console Settings Part 16/32 PS/2 KVM over IP switch Power Control 16. Power Control17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings Video4Device Settings Network16/32 PS/2 KVM over IP switch Dynamic DNS 20. Dynamic DNS16/32 PS/2 KVM over IP switch Security 22. Device SecurityAnti Brute Force Setting Unblocking users Certificate24. SSL Certificate Upload Serial Port 25. Serial Port16/32 PS/2 KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event LogDevice Information Board SummaryReset Functions 32. Event Log ListUpdate Firmware 33. Update FirmwareUnit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS2 KVM over IP Key Codes Table B.1 Key Names Video Modes

PS/2 IP specifications

The Avocent PS/2 IP KVM (Keyboard, Video, Mouse) switch is a sophisticated solution designed to provide remote access and management capabilities for servers and devices located in data centers or remote locations. As IT environments grow increasingly complex, the need for seamless and efficient management tools becomes essential. The Avocent PS/2 IP addresses this need by integrating high-end features and technologies that streamline operation and enhance productivity.

One of the standout features of the Avocent PS/2 IP is its ability to facilitate secure, remote access to connected devices through an IP network. This enables administrators to control servers and troubleshoot issues from virtually anywhere, eliminating the need to be physically present in the server room. The system supports multiple simultaneous user sessions, allowing multiple administrators to connect and manage devices at the same time, which is crucial for teamwork in large IT environments.

In terms of security, the Avocent PS/2 IP employs robust authentication mechanisms, including user-level access control and encrypted remote sessions. This ensures that only authorized personnel can access sensitive systems, significantly reducing the risk of unauthorized access or data breaches.

The Avocent PS/2 IP is designed to support a wide range of operating systems and server hardware, making it an extremely versatile solution for diverse IT infrastructures. It is compatible with various PS/2 devices and incorporates advanced video quality technologies to deliver high-definition video output, ensuring that administrators receive a clear and accurate representation of the connected systems.

Additionally, the device features built-in monitoring and alerting capabilities. These functionalities allow IT teams to keep track of device status, receive notifications of potential issues, and proactively address problems before they escalate into major outages. The ease of integration with existing management software also enhances its effectiveness.

Another significant characteristic of the Avocent PS/2 IP is its scalability. Organizations can easily expand their KVM infrastructure as their needs grow, allowing for the addition of more servers or devices without requiring a complete system overhaul. This flexibility makes it a cost-effective choice for businesses aiming to future-proof their IT operations.

In conclusion, the Avocent PS/2 IP KVM switch combines advanced remote access capabilities, strong security features, and broad compatibility, making it an essential tool for efficient IT management in today’s fast-paced technological landscape. Its design focuses on enhancing productivity and minimizing downtime, proving beneficial for organizations seeking streamlined operations and superior control over their server environments.